Philips 55PL9774, 62PL9774 setup guide Cleaning or Replacing the Filters

Page 69

Cleaning or Replacing the Filters

The Cineos TV has two filters that cover air inlets on the bottom of the set. Maintaining a free flow of air through the inlets is very impor- tant. If the air filters become dirty, clogged, or blocked, the temperature in the set will rise.

Should the heat level become too high due to blockage, a sensor detects this, and a warning message appears on screen alerting you to check the air inlets for blockage. The message will be displayed for 6 seconds. It reappears every 15 minutes as long as the temperature remains too high.

If the internal temperature of the TV rises to high, a warning message alerts you that the TV is shutting down. If the temperature remains at this high level for 1 minute, the TV will enter Standby mode. In Standby mode, the TV is off.

Be sure the TV is not placed on a surface (such as a shag carpet) that will prevent the free flow of air through the inlets, and periodically clean or replace the filters as detailed in the following instructions.

WARNING: Do not tip the TV when remov- ing or installing the filters. This may result in instability of the TV.

1 Place your fingers under one of the fil- ter slots located at either bottom left or right in back of the TV cabinet.

2 Grasp the filter and gently pull it straight out.

3 Examine the filter for dust or other contamination. If it is dirty, clean it with a vacuum cleaner. DO NOT WASH it. Replace the filter if vacuum- ing does not sufficiently clean it.

To order replacement filters, call the Philips Customer Care Center at

1-800-531-0039. The part number for the Philips TV inlet filter assembly is 3135 037 51810.

WARNING:

DO NOT operate the TV without fil- ters. This will cause serious damage to the TV.

4 Turn the filter so that the arrow is pointing toward the center of the TV. Align the edges of the filter with the slot track, then gently slide it all the way back into the slot. A click sound can be heard as the filter reaches the correct position.

Locations of Air Filters

1

2

RETNEC

CENTER

3

4

RET

NE

C

CENTER

69

Page 68 Page 70
Image 69
Page 68 Page 70
Contents 55PL9774 62PL9774 For Customer Use Dear Philips product ownerImportant Safety Instructions Contents Features Resolution information Ways TV Signals Can Come toYour HomeYour High-definition-ready Set Interlaced ScanDescriptions of Jacks, Cables, and Connectors Panel Jack Compatibility Information Use only one of the video signal inputs at a timePositioning the TV Pre-connection RecommendationsColor Coding Used on Jacks and Plugs to simplify connections Connecting a VCRConnecting a VCR and Cable Box Back of TV Connecting an S-Video DeviceHelpful Hints Connecting a Standard DVD PlayerConnecting a Progressive-scan DVD Player Connecting an HD Satellite Receiver to YPbPr Back of TV Connecting an HD Satellite Receiver to DVIPowered Subwoofer Front Speakers Connecting Surround Sound EquipmentPossible when the input has been labeled Connecting to the Side InputsVideo Game SystemLabeling the Audio/Video Input Sources Remote Control Buttons Pixel Plus Demo Standby-OnVCR/DVD Functions Surround SoundVCR DVD Programming the Remote ControlCheck IT OUT Amplifier Programming the Remote Control Setup CodesVCR Operating Accessory Devices with the TV Remote DVD Mode AMP Mode CBL Cable & SAT Mode VCR ModeActive Control Plus Settings Using Active Control PlusAutoPicture Options Selecting an AutoPicture OptionPicture Control Settings Adjusting/Setting the Picture ControlsSelecting a Digital Processing Option When PixelPlus is on, the image isDemo Flicker free and sharper. MotionPress the Cursor Right button to select Picture Selecting a Dynamic Contrast OptionDNR is not available for use with input sources AV3-AV6 Selecting a DNR Dynamic Noise Reduction OptionTurning on Color Enhancement Your TV’s Picture Format Options Selecting a Picture Format OptionAuto Adjusting the TV and Headphone Volume To control the television volumeTo control the Headphone volume AutoSound Options Selecting an AutoSound OptionSelecting a TV Equalizer Option Adjusting TV Speaker Balance Turning Loudness on or off Selecting a Sound Mode Option Using Alternate Audio SAP Setting the TV for Stereo Programming Turning the AVL Audio Volume Leveler on or off Adjusting the Delta Volume CC-1, CC-2, CC-3, or CC-4-Dialogue Using Closed CaptioningOn-screen menu from the TV screen Setting the Sleeptimer11 TV Setting the On TimerUsing the Channel List Removing Channels from the Channel List Using Lock Channel Using Lock After TV Ratings from TV Broadcasters Blocking Programming Based on TV RatingsMovie Ratings Blocking Programming Based on Movie RatingsTurning the Antenna Attenuator on or off Channels Surf Using SurfUsing Dual Screen and PIP When using Dual Screen When using Large or Small PIPTo reposition the PIP screen Resetting the Audio/Video Settings to Factory Default Values Selecting an On-screen Display Option Minimum mode default modeSetting up or Changing a PIN Personal Identification Number Setting the Subwoofer Control Auto Clock Channel Setting the Clock-Auto Clock ModeSetting the Clock Manually Time zone Atlantic Daylight saving Eastern General Settings Using Installation Features Language and Autoprogram For LanguageFor AutoProgram Cleaning the Screen Cleaning the CabinetCleaning or Replacing the Filters Replacing the Lamp Replacing the Lamp You have changed the lamp Resetting the Lamp’s Lifetime CounterTroubleshooting TV-related Checks You have no picture Remote-related Checks Remote control does not workYou have no picture and no sound You see scrolling imagesPicture Product SpecificationsIndex Page Page Page Philips Television Limited Warranty
Related manuals
Manual 2 pages 51.61 Kb Manual 2 pages 53.69 Kb

62PL9774, 55PL9774 specifications

The Philips 55PL9774 and 62PL9774 are standout models in the Philips television lineup, combining advanced technology with a sleek design to enhance the viewing experience. Both models are part of Philips' commitment to providing high-quality displays that cater to the needs of modern viewers.

One of the most notable features of the Philips 55PL9774 and 62PL9774 is their stunning 4K Ultra HD resolution. With a resolution of 3840 x 2160 pixels, viewers can enjoy crisp, clear images that bring content to life. The impressive pixel density ensures that even the finest details are rendered with remarkable clarity, making these televisions ideal for everything from movie nights to gaming.

In addition to their impressive resolution, both models incorporate Philips' Ambilight technology. This unique feature uses LED lights placed on the back of the TV to create an immersive lighting experience that extends the screen's colors into the surrounding environment. This not only enhances the overall viewing experience but also transforms any room into a dynamic, cinematic space.

Both the 55PL9774 and 62PL9774 support HDR (High Dynamic Range) for vivid colors and improved contrast. With HDR, darker scenes reveal hidden details, while bright scenes burst with color, offering an unparalleled level of visual fidelity. This feature is particularly beneficial for content that is designed with HDR in mind, like modern films and video games.

The audio experience is also noteworthy, as both models come equipped with high-quality sound systems that provide rich and immersive audio. The integration of Dolby Atmos technology enhances the soundstage, allowing viewers to feel as though they are part of the action. Whether you’re watching the latest blockbuster or listening to music, the auditory experience is designed to complement the stunning visuals.

Connectivity is a strong suit for both models. They support multiple HDMI and USB ports, as well as wireless connectivity options such as Wi-Fi and Bluetooth. This makes it easy to connect various devices like gaming consoles, streaming boxes, and sound systems, ensuring that users can enjoy a seamless entertainment setup.

In summary, the Philips 55PL9774 and 62PL9774 offer a all-around superior viewing experience, with their 4K resolution, Ambilight technology, HDR support, and immersive audio capabilities. These features, combined with robust connectivity options, make them excellent choices for anyone looking to elevate their home entertainment setup.
Top Page Image Contents