Philips BDH4251V/00 user manual It may cause malfunction

Page 4

User Manual BDH4251V/00

EN Safety Precautions

Always obey all

safety messages.

•All the safety and operating instructions should be read before the product is operated.

CAUTION

You can be injured, or this product or any other of your property can be damaged if you don’t follow instructions.

Power

When moving your Monitor, remove the power plug, and cables, and be sure to move it by using two people..

Failure to follow this instruction can result in electric shock or personal injury.

Installation

Do not install the product where there is oil, smog, moist, or dust

It may cause malfunction.

For proper ventilation, separate the product from the wall, and keep a distance of more than 10cm (4inches).

Due to the increase of temperature inside the Monitor, it may cause ﬁre.

Do not touch the power plug with wet hands when plugging or unplugging it into the wall socket.

It can result in a risk of electric shock.

Do not install the product where it will be exposed to the direct sunlight, and the product should not be near heat sources such as radiators, stoves, etc.

It may cause malfunction.

Minimum distances around the apparatus for sufﬁcient ventilation.

Due to the increase of temperature inside the Monitor, it may cause a ﬁre.

If you wish to install this product on the wall or ceiling, refer to a professional.

Failure to do so may cause damage to product and injury to human.

4

Image 4

Contents Type Nr. BDH4251V/00 Power EN Safety PrecautionsInstallation During Use Do not allow children to play or hang on the MonitorIt may cause malfunction Do not place any object or cover on the Monitor EN Checking Accessories Remote ControlStand Unit BatteriesAssembling the plasma display stand EN Contents EN Panel Controls Power Stand by Red Stand by Green on Power control sensorFront Rear PC OutputIndicates the current state and resolution Normal Dynamic Cinema UserUsed to display a desired menu Press this button to freeze the pictureInstalling the batteries in your remote control Press the Power Buttons EN Watching Digital BroadcastsWatching Digital Broadcasts Component AudioSelect the Desired Channel and Function Input SelectEN Watching Cable Broadcasts PDPWatching Cable Broadcasts VideoBy pressing the AV button of the remote control Input SelectSelect the Desired Program and Function Select AV 1Scart, AV 2Scart or AV3S-VideoEN Watching Satellite Broadcasts Connect a Satellite Broadcasting Receiver to PDPWatching Satellite Broadcasts Turn the PDP and the Satellite receiver onRemote control or Keypad of the PDP Unit Mode with ButtonSelect AV 1Scart, AV 2Scart or AV3S Video by pressing the AV buttonEN Watching a DVD Image Connect a DVD Player to the PDPWatching a DVD Image Prepare the AV cableSelect the Desired Title and Function EN Watching a VCR Image Connect a VCR to the PDPWatching a VCR Image Turn the PDP and the VCR onSelect AV 1Scart, AV 2Scart or AV 3S-Video by Connect a Camcorder/Game Console to PDP EN Watching a Camcorder/Game Console ImageTurn the PDP Camcorder/Game Console on Select Function AV button of the Remote Control orPDP unit Connecting PC EN Connecting PC15pin D-subConnect the PC to the PDP Select desire input mode with You cannot select PC if the picture in picture mode is onTurn on the PDP and the PC Connect the Hdmi to the PDP Connecting HdmiGame console Mode with Hdmi input port receives only digital signalRemote control or Turn on the PDP and DVD or Game consoleEN Connect with the Dolby Digital AMP PC and Hdmi Input Resolution Available in PDP EN Selecting Picture Mode Selecting Picture ModeSelecting Picture Mode Menu on the Screen will disappearSelect User by Buttons in the Mode EN Customizing PictureCustomizing Picture Menu shown below will display on the screenPicture Condition Adjustments While you are in Picture Mode User, pressPress the Color Temp button on the remote control Normal Warm CoolAdjusting with Picture FMT button EN Adjusting ScreenPress the Picture FMT Button Adjusting Screen in the Menu Adjusting ScreenPress Button Menu screen as shown below will appearScreen Mode Function Adjust the value by pressing the orOther Screen adjustments ButtonsEN Watching a Still Image Press the Still ButtonWatching a Still Image If you wish to freeze a picture, press the Still buttonEN Watching Two Pictures Simultaneously Engaging PIP modeSwap the pictures Watching Two Pictures Simultaneously Select the Input SourceAvailable PIP Input Combinations Are listed below for referenceEN Selecting Sound Mode Select Sound ModeSelecting Sound Mode Menu will DisappearEN Customising Sound Mode Adjust itMenu screen as below will be displayed Select Sound byEffect Mode also can be selected by pressing Select the Effect ModeEffect button on the remote controller Customizing Sound Mode Select the Sound ModeAdjust it by pressing the buttons Select the Sound Mode by pressing the buttons ThenEN Selecting Input Signal Press the Input Signal Selecting ButtonPress the AV button on the remote control, or select Desire input signal using Keypad of the PDP unitPress the Recall Button EN Checking the Current Input SignalVideo PAL B/G Selecting Languages Select Feature byMenu screen will be displayed as below Child Lock Setting When power is turned on the ﬁrst time, ‘SELECTOnce Select Child Lock bySelect Feature by Button EN Mgdi Plus Meta Genuine Digital ImageMgdi Plus Mgdi Plus function can not be used In PC and Hdmi modesMgdi Plus Setting Auto Power Setting From FeatureFront panel LED lights If Child Lock function is ON, this function is not operatedTime Setting EN Time Setting This effect Sticking on the screenPress of the button while you are in the ISM Image Sticking MinimisationISM Select FunctionsSelect Feature by Select FeatureBack to Initialization Select the Initialize by pressing Reset factory settingYES by Button Press the Timer Button Setting Sleep TimerSleep Timer OffHdmi Jack One 15 pin D-sub jack Phone JackOne 15 pin D-sub jack RCA jack