
User Manual BDH4251V/00
EN Checking the Current Input Signal
-Press the [RECALL] button on the remote control, then displays basic informations of the current input signal, Under this state, pressing the [RECALL] button once more, additional informations about the current input signal will be displayed on the OSD.
|
| Press the RECALL Button. | Checking the | ||
|
| Current Input Signal | |||
|
|
|
| ||
1 | RECALL | • Press the [RECALL] button on the Remote Control. | |||
|
Component
PM 12:00
H:1920
V:1080
1. If you watch Component, PC, or HDMI:
• Used to check the INPUT signal mode, current time, resolution, etc.
P.MODE PICTURE FMT | AV | |
S.MODE | S.EFFECT | PIXEL SHIFT |
PIP | POSITION COLOR TEMP | |
PIP SOURCE | SWAP | RECALL |
Component |
| Displays which input terminal is used, and indicates the input signal mode. |
| ||
PM 12:00 |
| MENU |
| Indicates the mode and current time. | |
|
VOLVOL
H:1920
Indicates the horizontal and vertical resolution of the current input signal
V:1080
2. If you watch VCR image: | TIMER STILL MUTE | |||||||
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
| AV1 |
| Displays the program number and input terminal, which is used. |
|
|
|
|
|
|
|
|
|
|
|
| ||
| PM 12:00 |
| Indicates the mode and current time. | |||||
|
| |||||||
|
|
|
| |||||
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
| Video PAL B/G |
| Displays the video system of input signal |
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTES:
1)“1920 x 1080” displayed in the INPUT signal is not the resolution of the set, but the signal that is sent by the Digital Broadcasting Receiver.
46