Alesis PEQ-450 manual Instructions to the User FCC Notice

Page 14

PEQ-450 Manual

Instructions to the User (FCC Notice)

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

2.Reorient or relocate the receiving antenna.

3.Increase the separation between the equipment and receiver.

4.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

5.Consult the dealer or an experienced radio/TV technician for help.

This equipment has been verified to comply with the limits for a class B computing device, pursuant to FCC Rules. In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user’s authority to operate this equipment.

14

PEQ-450 Reference Manual

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Reference Manual PEQ-450 Manual Contents Troubleshooting PEQ-450 Manual Welcome How to Use This Manual Important Safety Instructions Please follow these precautions when using this productPEQ-450 Manual Instructions de Sécurité Importantes French PEQ-450 Manual PEQ-450 Manual CE Declaration of Conformity Instructions to the User FCC Notice If you cant wait to get started Hook it up to a mixerPlay some signal into the unit Try some equalizationFind a peaky signal Try some filteringFront Panel Diagram Rear Panel DiagramThermal Considerations in Rack Mounting Installing in a RackUnpacking and Inspection AC Grounding PowerAC Power Hookup To use the PEQ-450 in another country ConnectionsConnecting inputs and outputs Connecting to the Channel Inserts of a mixing consoleConnecting to the Main Inserts of a mixing console Balanced I/OConnecting to the inserts on an instrument amplifier Connecting to equipment with XLR inputs and outputs Dual Channel OperationAbout Audio Cables What is equalization? Basics of EqualizationFrequency Description of ControlsGain Basics of equalization HPF Input OutputNoise Equalization ArtifiactsDistortion PhasingRock Kick Drum Vocal AirEliminating feedback Hum RemovalTape hiss removal Applications Applications chapter Troubleshooting Troubleshooting IndexKeep Audio Wiring AS FAR Away from AC Wiring AS Possible Avoiding ground loop noiseLine Conditioners and Protectors To Eliminate HUM if the Above has FailedObtaining Repair Service Care and MaintenanceCleaning Refer All Servicing to AlesisCustomers outside the USA and Canada Specifications Audio InputAlesis Limited Warranty Alesis

PEQ-450 specifications

The Alesis PEQ-450 is a powerful equalizer that caters to both professional sound engineers and audiophiles seeking to enhance the sonic quality of their audio tracks. This innovative piece of equipment incorporates advanced features and technologies that set it apart in the crowded market of audio processing gear.

One of the hallmark features of the Alesis PEQ-450 is its dual-channel 31-band graphic equalizer, allowing users to precisely fine-tune their audio output across a wide frequency spectrum. Each channel operates independently, making it an ideal solution for stereo applications where distinct control over left and right channels is essential. The equalizer covers a frequency range from 20 Hz to 20 kHz, ensuring that both low-end and high-end frequencies are addressed, thus delivering a rich and balanced audio experience.

Another notable characteristic of the PEQ-450 is its user-friendly interface, featuring an intuitive layout of sliders that clearly indicate gain adjustments per frequency band. The visual representation of frequency bands allows sound engineers to make quick and effective adjustments in live sound environments, where precision is paramount. Additionally, the unit includes bypass switches for each channel, enabling users to easily compare adjusted sound with the original signal.

In terms of technology, the Alesis PEQ-450 employs high-quality components that contribute to a low-noise operation and a high signal-to-noise ratio, ensuring that your audio remains pristine. The unit also includes a built-in limiter for each channel, protecting against signal clipping and distortion, which is crucial when working with loud audio sources.

The rack-mountable design of the PEQ-450 enhances its usability in studio and live settings alike, making it a versatile tool for audio professionals. The durable construction ensures reliability even in demanding environments, while its lightweight nature adds to its portability.

For connectivity, the Alesis PEQ-450 supports both balanced XLR and TRS inputs and outputs, making it compatible with a wide range of audio equipment. This flexibility allows for easy integration into existing setups, whether it be for live performances, broadcasting, or studio recordings.

In summary, the Alesis PEQ-450 is a feature-rich and technologically advanced equalizer that stands out for its precision, ease of use, and versatility. Whether you are an experienced engineer or a new enthusiast, the PEQ-450 offers the tools needed to achieve exceptional sound quality.
Top Page Image Contents