Alesis PEQ-450 manual AC Power Hookup, AC Grounding

Page 20

connections • chapter 2

Power

Make sure you read the initial Important Safety Instructions chapter at the front of this manual.

AC Power Hookup

Plug the female end of the power cord into the PEQ-450’s POWER INPUT socket and the male (plug) end into a good quality, noise-free AC power source of the proper rating.

Tip: It’s good practice to not turn on the PEQ-450 until all other audio cables are hooked up as well. Make sure your amplifier or powered speakers are switched off when turning the PEQ- 450 on or off to avoid damage.

The PEQ-450 works with any standard line voltage from 100 to 230 volts and comes with a detachable AC line cord suitable for the destination to which the unit is shipped.

AC Grounding

The line cable is an IEC-spec AC power cable designed to be connected to a grounded 3-pin outlet, with the third, round pin connected to ground. Do not substitute any other type of AC cord; IEC-spec cables of various lengths may be purchased from electronics stores or your Alesis dealer.

The ground connection is an important safety feature designed to keep the chassis of electronic devices such as the PEQ-450 at ground potential. Unfortunately, the presence of a third pin does not always indicate that an outlet is properly grounded. You may use an AC line tester to determine this. If the outlet is not grounded, consult with a licensed electrician. When AC currents are suspected of being highly unstable in VAC and Hz, a professional power conditioner should be used.

20

PEQ-450 Reference Manual

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Reference Manual PEQ-450 Manual Contents Troubleshooting PEQ-450 Manual Welcome How to Use This Manual Important Safety Instructions Please follow these precautions when using this productPEQ-450 Manual Instructions de Sécurité Importantes French PEQ-450 Manual PEQ-450 Manual CE Declaration of Conformity Instructions to the User FCC Notice If you cant wait to get started Hook it up to a mixerPlay some signal into the unit Try some equalizationFind a peaky signal Try some filteringFront Panel Diagram Rear Panel DiagramThermal Considerations in Rack Mounting Installing in a RackUnpacking and Inspection AC Grounding PowerAC Power Hookup To use the PEQ-450 in another country ConnectionsConnecting inputs and outputs Connecting to the Channel Inserts of a mixing consoleConnecting to the Main Inserts of a mixing console Balanced I/OConnecting to the inserts on an instrument amplifier Connecting to equipment with XLR inputs and outputs Dual Channel OperationAbout Audio Cables What is equalization? Basics of EqualizationFrequency Description of ControlsGain Basics of equalization HPF Input OutputEqualization Artifiacts DistortionNoise PhasingRock Kick Drum Vocal AirEliminating feedback Hum RemovalTape hiss removal Applications Applications chapter Troubleshooting Troubleshooting IndexKeep Audio Wiring AS FAR Away from AC Wiring AS Possible Avoiding ground loop noiseLine Conditioners and Protectors To Eliminate HUM if the Above has FailedCare and Maintenance CleaningObtaining Repair Service Refer All Servicing to AlesisCustomers outside the USA and Canada Specifications Audio InputAlesis Limited Warranty Alesis

PEQ-450 specifications

The Alesis PEQ-450 is a powerful equalizer that caters to both professional sound engineers and audiophiles seeking to enhance the sonic quality of their audio tracks. This innovative piece of equipment incorporates advanced features and technologies that set it apart in the crowded market of audio processing gear.

One of the hallmark features of the Alesis PEQ-450 is its dual-channel 31-band graphic equalizer, allowing users to precisely fine-tune their audio output across a wide frequency spectrum. Each channel operates independently, making it an ideal solution for stereo applications where distinct control over left and right channels is essential. The equalizer covers a frequency range from 20 Hz to 20 kHz, ensuring that both low-end and high-end frequencies are addressed, thus delivering a rich and balanced audio experience.

Another notable characteristic of the PEQ-450 is its user-friendly interface, featuring an intuitive layout of sliders that clearly indicate gain adjustments per frequency band. The visual representation of frequency bands allows sound engineers to make quick and effective adjustments in live sound environments, where precision is paramount. Additionally, the unit includes bypass switches for each channel, enabling users to easily compare adjusted sound with the original signal.

In terms of technology, the Alesis PEQ-450 employs high-quality components that contribute to a low-noise operation and a high signal-to-noise ratio, ensuring that your audio remains pristine. The unit also includes a built-in limiter for each channel, protecting against signal clipping and distortion, which is crucial when working with loud audio sources.

The rack-mountable design of the PEQ-450 enhances its usability in studio and live settings alike, making it a versatile tool for audio professionals. The durable construction ensures reliability even in demanding environments, while its lightweight nature adds to its portability.

For connectivity, the Alesis PEQ-450 supports both balanced XLR and TRS inputs and outputs, making it compatible with a wide range of audio equipment. This flexibility allows for easy integration into existing setups, whether it be for live performances, broadcasting, or studio recordings.

In summary, the Alesis PEQ-450 is a feature-rich and technologically advanced equalizer that stands out for its precision, ease of use, and versatility. Whether you are an experienced engineer or a new enthusiast, the PEQ-450 offers the tools needed to achieve exceptional sound quality.
Top Page Image Contents