User Manual BDS4241V/BDH4241V/BDH5021V
5. BASIC FUNCTIONS
Main Input
TV
SCART 1
SCART 2
VIDEO
COMPONENT
RGB
DVI
HDMI 1
HDMI 2
Move [- CH +] Select [- VOL | +] Exit [MENU] |
5.1POWERING ON / OFF
Make sure the monitor is plugged into the wall outlet with the supplied power cord.
If the power is plugged in, the STATUS LED on the control panel will illuminate in red color.
Using Front Panel or Remote Control
1Press the POWER key on the front panel or the remote control. => The monitor will now turn on after a brief pause. The STATUS LED will now turn green to indicate power on status.
2Turn off the power by pressing the POWER key on the front panel or the remote control again.
5.2SELECTING SIGNAL SOURCE
Using Front Panel or Remote Control
1Press the INPUT key on the front panel or the AV key on the remote control.
2Pressing the CH+ or CH- key will cycle the monitor through all available input signal sources in the following order:
SCART1 - SCART2 - VIDEO - S-VIDEO - COMPONENT - RGB - DVI
3Press the VOL+ or VOL- button to select the source.
17