Note
•Cables are often colour coded. Connect red to red, white to white, etc.;
•The labels for the component video sockets may differ depending on the DVD player connected.Although the abbreviations may vary, the letters B and R stand for the blue and red component signals, respectively, and Y indicates the luminance signal. Refer to the DVD player’s instructions for use for definitions and connection details;
•To get an optimal viewing, it is advised to switch your equipment to the highest possible supported display modes.
Warning
If you notice scrolling images,
wrong colours or no colour, no picture, or even combinations of these on your screen, verify if the connections are done in the correct way and if the resolution and the signal standard of the connected equipment are set in the right way. See the user manual for your equipment.
32.7 Connect a PC
Note
•Only digital output of the PC can be connected via DVI to HDMI cable.
VGA connection is not supported.
•Before connecting your PC to the TV, select your PC monitor settings to a refresh frequency of 60 Hz.
Connectors | Connectors at rear of |
at side of TV | TV (facing downward) |
Audio
L/R
| HDMI | English |
|
| |
2 | 1 |
|
|
| |
| DVI |
|
PC
PC equipped with a DVI connector
Use a DVI to HDMI cable to connect to one of the HDMI connectors of your TV 1 .
Connect the audio cable to the PC’s AUDIO jack and to the L/R AUDIO jacks of TV EXT3 2 .
Press the
key on the remote control to display Source list.
Press the ï key to select HDMI 1 or
HDMI 2 and press the Æ/ | key | |
to confirm selection. |
| |
|
| |
Supported PC resolutions |
| |
|
| |
640 x 480, 60 Hz | 800 x 600, 75 Hz | |
640 x 480, 72 Hz | 800 x 600, 85 Hz | |
640 x 480, 75 Hz | 1024 x 768, 60 Hz | |
640 x 480, 85 Hz | 1024 x 768, 70 Hz | |
800 x 600, 60 Hz | 1024 x 768, 75 Hz | |
800 x 600, 72 Hz | 1024 x 768, 85 Hz | |
|
|
|
PC resolutions for LCD TV. Not applicable to 20” LCD TV or Plasma TV
1280 x 768, 60 Hz
1280 x 1024, 60 Hz
1360 x 768, 60 Hz
47