| AUDIO | |
L | R | VIDEOS•VHS |
1 2 3
n
Camera & camcorder
&Connect your camera or camcorder at the front side of your receiver.
éConnect the equipment to VIDEO 2 and AUDIO L 1 for mono equipment.
“For stereo equipment also connect AUDIO R 1.
Headphone
&Insert the plug into the headphone socket L at the front side of the receiver.
éPress ¬ to switch off the internal loudspeakers of the TV. The headphone impedance must be between 8 and 2000 Ohm. The headphone socket has a 3.5 mm jack.
In the SOUND menu select Headphone to adjust the headphone volume and balance and to select the audio source for your headphone sound. See p. 14.
L |
|
AUDIO OUT | SURROUND |
R | |
| SOUND CENTRE IN |
2
1
Dolby Pro Logic Surround receiver
&Connect the audio cable to the Dolby Pro Logic Surround receiver and to AUDIO OUT L and R at the back of your receiver box 1.
éIf you want the loudspeakers of your monitor to act as centre speaker, also connect an audiocable to the Dolby Pro Logic Surround receiver and to the
SURROUND SOUND CENTRE IN at the back of your receiver box 2.
“Select Centre mode On in the Setup menu. See p. 9, or switch Centre Mode On with the white colour key on the remote control.
In the Sound menu only the volume menu item can be controlled.
The loudspeakers of the monitor will now only produce centre sound, the loudspeakers connect to the audio receiver will produce Surround Sound.
If you want to connect more equipment to your receiver, consult your dealer.