Connect your computer
MAINS INLET | L |
AUDIO IN | AUDIO OUT |
VGA OUT
VGA IN
R
5 |
1 | 2 | 2 | 4 | 3 |
&Connect one end of a VGA cable supplied to the video card of the computer
and the other end to the VGA MONITOR IN connector at the rear side of the receiver box or at the VGA IN connector 1 at the back of the monitor in case you have no receiver box connected to the monitor.
See the instructions with the monitor.
éFix the connectors firmly with the screws on the plug.
“In case of a Multimedia computer, connect audio cables to the audio outputs of your Multimedia computer and to the AUDIO MONITOR IN R (right) and
L (left) above the VGA MONITOR IN connector at the back of the receiver or to the AUDIO IN L and R 2 at the back of the monitor.
Connect your Apple Macintosh* computer
Attention: Macintosh computers with separate H and V synchronisation signals can be used together with a switchable adaptor. Macintosh computers with Composite Sync and Sync on Green signals may need another special adaptor or cable. Contact your dealer.
&Connect the switchable adaptor for Apple video connectors to one end of a VGA cable.
éPut the DIP switches on the adaptor in the following positions :
1 | 2 | 3 | 4 |
off | off | on | on |
“Connect the end of the VGA cable with the adaptor to the video card of the computer and the other end to the VGA MONITOR IN connector on the back of the receiver box or at the VGA IN connector on the back of the monitor in case you have no receiver box connected.
‘Screw the connectors down firmly.
a |
|
To reproduce computer screen information and/or programmes, see p. 25.
*Apple Macintosh is a registered trademark of Apple Computer, Inc.