User Manual BDL5571V
4.2.5. CONFIGURATION 1 MENU
Auto adjust
Note: For the VGA input only.
Use this function to let the monitor automatically optimize the display of VGA input image. Press the SET/PLUS button to open the submenu, and then press the SET button to adjust.
Power save
Set the monitor to reduce the power automatically.
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle between
∙VGA - Select ON to let the monitor enter DPMS mode when no signal can be detected from the DisplayPort, HDMI,
∙VIDEO - Select ON to let the monitor enter power saving mode when no signal is detected from the YPbPr inputs after three successive cycles. Use the PLUS/MINUS button to make selection.
Language
Select the language for the OSD menu.
Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle between
∙ English | ∙ Deutsch |
∙ Pyccкий | ∙ 中文 |
∙ Polski | ∙ Français |
∙ Italiano | ∙ Español |
∙ Türkçe |
|
Panel saving
Choose to enable the panel saving functions to reduce the risk of the "image persistence”. Press the SET/PLUS button to open the submenu, and then press the UP/DOWN button to toggle between
∙COOLING FAN - Select On and the cooling fan is turning on all the time. Select AUTO and the cooling fan will turn on/off according to the temperature of monitor.
Note: The conditions of the cooling fan is low/mid/high speed at 50/58/63 °C respectively. It would be automatically shut down if the monitor reaches a preset critical temperature (82 °C).
40