Behringer UB1622FX-PRO, UB2442FX-PRO, UB2222FX-PRO, UB1832FX-PRO Detailed Safety Instructions

Page 2

EURORACK UB1622FX-PRO/UB1832FX-PRO/UB2222FX-PRO/UB2442FX-PRO

SAFETY INSTRUCTIONS

CAUTION: To reduce the risk of electric shock, do not remove the cover (or back). No user serviceable parts inside; refer servicing to qualified personnel.

WARNING: To reduce the risk of fire or electric shock, do not expose this device to rain and moisture.

This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure—voltage that may be sufficient to constitute a risk of shock.

This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.

DETAILED SAFETY INSTRUCTIONS:

All the safety and operation instructions should be read before the device is operated.

Retain Instructions:

The safety and operating instructions should be retained for future reference.

Heed Warnings:

All warnings on the device and in the operating instructions should be adhered to.

Follow instructions:

All operation and user instructions should be followed.

Water and Moisture:

The device should not be used near water (e.g. near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool etc.).

Ventilation:

The device should be situated so that its location or position does not interfere with its proper ventilation. For example, the device should not be placed on a bed, sofa, rug, or similar surface that may block the ventilation openings, or used in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

Heat:

The device should be situated away from heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat.

Power Source:

The device should only be connected to a power supply of the type described in the operating instructions or on the device.

Grounding or Polarization:

This device must be grounded.

Power Cords:

Power cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords and plugs, sockets, outlets and the point where they exit from the device.

Cleaning:

The device should be cleaned only as recommended by the manufacturer.

Non-use Periods:

The power cord of the device should be unplugged from the outlet when left unused for a long period of time.

Debris and Liquid Entry:

Debris and/or liquids should not be allowed to enter the enclosure through openings.

Damage Requiring Service:

The device should be serviced by qualified service personnel when:

sThe power cord or the plug has been damaged; or

sDebris or liquid has entered the device; or

sThe device has been exposed to rain; or

sThe device does not appear to operate normally or exhibits a pronounced change in performance; or

sThe device has been dropped, or the enclosure damaged.

Servicing:

The user should not attempt to service the device beyond that which is described in the operating instructions. All other servicing should be referred to qualified service personnel.

2

Image 2
Contents User’s Manual Version 1.2 JulySafety Instructions Detailed Safety InstructionsTable of Contents Dear Customer ForewordGeneral mixing console functions IMP Invisible MIC PreampMono channels User’s manualBefore you get started AUX FX LO CUTPRE PANStereo channels Interface panel and main sectionStereo AUX Return AUX Send 3 FXAUX Send FX Stereo AUX Return FXTo Subs Mute SoloStereo AUX Return 1/2 to AUX Send Main MIX / to Subs Solo ReturnsTape Input PowerMonitor Tape OutputLevel SET PFL Level SettingMode Normal SoloSubgroup outputs Digital Effects ProcessorMain mix outputs, insert points and control room outputs Direct outputs UB2442FX-PRO only Voltage supply, phantom power supply and fuseInserts Rack mounting Cable connectionsSpecifications § 4 Warranty Regulations § 1 Warranty CARD/ONLINE Registration § 2 Warranty§ 3 Return Authorization Number § 5 Warranty Transferability