Philips H982NUD Videotape Recording, Recording Prevention, To stop recording, press Stop C

Page 24

H982NUD_EN1 3/2/06 6:56 PM Page 24

English

24Videotape Recording

Read and follow the steps below to record a television program onto a videotape.

●Before you begin, make sure the DVD/VCR is in VCR mode. Press VCR so VCR light appears on the front of the DVD/VCR.

1 Turn on the TV and set it to channel 3 or 4 or the Video In channel. If you connected the DVD/VCR to the TV using the supplied audio and video cables, select your TV’s Video In channel. Details are on page 12.

If you connected the DVD/VCR to the TV using the supplied RF coaxial cable, choose channel 3 (or 4) at the TV. Details are on pages 9-11.

2 Insert a tape with its record tab intact into the cassette compartment of the DVD/VCR. If tape playback begins, press STOP C.

3 Press SPEED until the desired tape speed (SP or SLP) appears briefly on the screen. Details about tape speed are on page 60.

4 Press SKIP ∑/CH K or SKIP w/CH L or the

Number buttons to select the TV channel to record.

5 Press RECORD I to start recording. “REC” will appear on the DVD/VCR’s display panel.

6 To pause the recording, press PAUSE k once. “REC” will flash. To resume recording, press RECORD I or press PAUSE k again. “REC” will reappear.

7 To stop recording, press STOP C.

Recording Prevention

Video cassettes have record tabs to ensure that recordings are not accidentally erased.

1 To prevent recording, break off the tab with a screwdriver.

2 To allow recording, cover the hole with clear tape.

Remove the

 

Cover the

tab to prevent

 

hole to allow

recording.

 

recording.

 

1 Turn on the TV.

2 Insert a tape in the DVD/VCR.

 

 

 

STANDBY-ON

 

 

SEARCH

MODE

DISPLAY

 

 

REPEAT REPEAT

AUDIO

 

4

 

 

A-B

 

 

 

SUBTITLE

ZOOM

ANGLE

SKIP / CH

 

RETURN

TITLE CLEAR/RESET SLOW

 

 

VCR

VCR/TV

DVD

 

 

DISC/VCR

 

 

SYSTEM

 

 

MENU

 

 

MENU

 

7

 

OK

 

 

6

STOP

PLAY

PAUSE

 

TIMER SET

MARKER

RECORD

 

3

SPEED

 

 

 

 

 

1

2

3

 

4

5

6

7

 

4

8

9

0

+10

 

5-6

Helpful Hints

•Other recording options are on pages 25-30.

•The VCR will record in a preset volume.

•Pause will switch to Stop after 5 minutes to protect the VCR and the tape from damage.When a recording is paused, review the pause time remaining with

the ■ marks on the screen. Each ■ mark equals

1 minute remaining. During the last minute of paused recording, the ■ mark will flash.

•If any menu is on the TV screen, RECORD I on the remote does not function. Press CLEAR/RESET to remove the menu.Then, press RECORD I. Or, use REC I on the front of the DVD/VCR.

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Need help fast? Besoin dune aide Rapide?Necesita ayuda Inmediata? Proof of Purchase For Customer UseImportant Safety Instructions Safety Information cont’d Safety PrecautionsDeclaration of Conformity BoxTable of Contents Introduction Playable Discs and Video Cassettes Hookups Determining the best possible connectionHookups cont’d Connections RememberSignal CableRF coaxial cable TV’s Antenna Jack of your DVD/VCR DVD/VCR Audio OUT jacks on the DVD/VCR and to the redComposite or Baseband video Video OUT jacks on the DVD/VCR and to the ComponentDVD/VCR to a TV and a Stereo Check your Stereo manual for detailsStereo Putting Batteries in the Remote Control Using the Remote ControlRecycling Guidelines/Battery Safety First-time DVD/VCR Setup Other tape playback features are on pages Video Cassette PlaybackRead and follow the steps below to play a tape Turn on the TV. Insert a tapeDisc Playback Press OPEN/CLOSE aOn the DVD/VCR Insert a discDisplay Panel DVD Display PanelVCR Display Panel Display MessagesFront Panel, Rear Panel and Remote Control Remote ControlFront Panel Rear PanelChannel Setup Adding/Deleting ChannelsPress CLEAR/RESET or B to start the clock Clock VCRWhile the DAY space is flashing, press K or L until While the Year space is flashing, press K or LPress CLEAR/RESET to remove the menu Language VCRVCR Status Displays Press Display again to remove all the displaysVideotape Recording Recording PreventionTo stop recording, press Stop C Turn on the TV Insert a tape in the DVD/VCRUse the TV remote control to select the channel Remote control to return to channel 03 or 04 atPress VCR/TV on the DVD/VCR remote control to Press VCR, then press Record I to recordWhen an OTR ends One-Touch RecordingStopping an OTR Point the remote control at DVD/VCR 2. Press Rerecording Tape DuplicationMake the connections shown above Turn on the TV and set it to channel 03 or 04Timer Recording Timer Recording cont’d Cancelling Timer RecordingsWhen a timer recording ends Press K or L to select a recording tape speed. The arrowDVD to Videotape Duplication Speed are onRepeat Playback Tape CounterTime Search, Index Search Time SearchIndex Search A recording by following these stepsAutomatic Operation Features Special Effects PlaybackMulti-Channel Television Sound / Hi-Fi Stereo Understanding DisplaysMulti-Channel Television Sound Hi-Fi StereoUsing the Title Menu Menus, Playback Control PBC FunctionPlayback Control PBC Function Press K, L, s or B to select an item, then press OKDuring playback, press Search g or h on Remote control Fast Forward/Reverse SearchPress Play B to return to normal playback To resume normal playback, press Play BTitle/Chapter Playback,Time Playback Title/Chapter PlaybackTime Playback Using Search Track PlaybackPressed within 30 seconds of the previous number Begin or the current track will continue to playPaused and Step-by-Step Playback Resume OnDuring disc playback, press Pause k. Playback will Pause and the sound will be muteRepeat, A-B Repeat RepeatLet you start over OFF will appear briefly on Markers Within 30 seconds, press s or B to select a MarkerTo return to a Marker during playback, press Subtitles, Camera Angles SubtitlesCamera Angles Audio Language, Stereo Sound Mode Stereo Sound ModeAudio Language During DVD playback, press Audio repeatedly toSlow Motion, Zoom Slow MotionZoom Press Pause F during DVD or Video CD playbackProgram/Random Playback Program PlaybackRandom Playback 46 MP3/Windows MediaTM Audio/JPEG Playback Dual Playback Folder PlaybackPress K or L to select a folder, then press Play B or OK On-Screen Displays DVD DisplaysVideo CD and Audio CD Displays On-Screen Displays cont’d Press Display again to remove the displayBlack Level,Virtual Surround InitializingBlack Level Virtual SurroundInstructions continue on the next Language cont’d Instructions from the previousLanguage Codes Select a setting, then press OK DisplayPress s or B to select DISPLAY, then Press OK Press K or L to select an item, then press OKYou may adjust the Progressive Scan compatibility Display cont’dProgressive Scan If Progressive is ON, this message appearsAudio While playback is stopped, pressPress s or B to select Custom at the top Menu, then press OKParental Password Password CHANGE, then press OKPress DVD to put the DVD/VCR in DVD mode. DVD While playback is stopped, press SYSTEM/MENUParental Levels Press sor B to select Custom at the top Menu, then press OKPress sor B to select PARENTAL, at the topOthers Press s or B to select OTHERS, then Press OKIf you selected Auto Power OFF, press OK Repeatedly to choose on or OFF.The default setting isOthers cont’d ON. Choose on if you want the player to turn off whenGlossary Cable Box/Satellite Receiver Output Channel 03 orHelpful Hints Helpful Hints cont’d Line Input mode Cleaning the Video HeadsYou cannot insert a video cassette You cannot remove the tapeCare and Maintenance SpecificationsLimited Warranty WHO is CoveredInformation Index Controls Dvd/vcr Remote

H982NUD specifications

The Philips H982NUD is an innovative hair dryer that combines advanced technology with user-friendly features, designed for both professional and home use. This model stands out in the market due to its remarkable efficiency and performance, making it a favorite among beauty enthusiasts.

One of the main features of the Philips H982NUD is its powerful motor, which ensures rapid drying while minimizing heat exposure. This is particularly important for maintaining hair health, as excessive heat can lead to damage over time. The dryer operates with a range of heat and speed settings, allowing users to customize their experience based on hair type and styling needs. With precise control, users can choose lower temperatures for fine or damaged hair and higher settings for thicker textures.

Another significant technology integrated into the Philips H982NUD is the ThermoProtect feature. This innovative technology helps regulate the temperature of the airflow to prevent overheating, ensuring that your hair remains at a safe temperature while drying. This not only protects hair from potential damage but also enhances shine, leaving locks looking healthy and vibrant.

The design of the H982NUD is both functional and aesthetic. It features an ergonomic handle for comfortable grip during use, reducing fatigue even during prolonged styling sessions. Additionally, the hair dryer is relatively lightweight, making it easy to maneuver. A long power cord adds to the convenience, providing ample reach while styling without the hassle of being tethered to a wall outlet.

The H982NUD also comes with an assortment of attachments that enhance its usability. The included concentrator nozzle allows for precise styling, making it easier to create sleek, straight looks or add volume through targeted airflow. A diffuser attachment is also available, perfect for enhancing natural curls and waves without disrupting their formation.

Overall, the Philips H982NUD hair dryer is distinguished by its balance of power, technology, and design. Its user-centric features make it an essential tool in any hair care routine, whether at home or in a salon. With a focus on hair health, ease of use, and versatility, the Philips H982NUD sets a high standard in the hair dryer market, catering to a diverse range of styling needs and preferences.
Top Page Image Contents