Philips H982NUD user manual Helpful Hints cont’d

Page 62

H982NUD_EN2 3/2/06 6:48 PM Page 62

English

62 Helpful Hints (cont’d)

You cannot change the camera angle of a DVD.

•The DVD might not contain segments recorded from different camera angles. See if multiple angles are available by referring to the disc case or DVD disc menu. Details are on page 42.

You cannot change the audio or subtitle language of a DVD.

•The DVD does not contain audio or subtitles in the desired language. Not all DVDs contain audio or subtitles in multiple languages. See if other languages are available by referring to the disc case or DVD disc menu. Details are on pages 42-43.

An X appears in the top right corner of the TV screen when you try a DVD feature.

•The operation is not available at the current time or the feature is not available on the disc. Some features are only available during playback. Others can be accessed only if playback is stopped.Try stopping or playing the disc, then try the feature again.

The DVD/VCR switches from DVD mode to VCR mode after 30 minutes of no activity.

•When AUTO POWER OFF is set to ON, the DVD/VCR switches itself from DVD mode to VCR mode if disc playback stops for more than 30 minutes and you press no buttons on the remote or the DVD/VCR. Details are on pages 58-59.This prevents possible damage to your TV’s picture tube that can occur if a still image is left on too long.

A screen saver appears on the TV screen during DVD mode.

• The DVD logo will appear on the TV screen when you stop disc playback.You cannot remove it.

You want to use the DVD player during a VCR timer recording or while “” appears on the display panel.

•Press STANDBY-ONy to turn on the DVD/VCR. Press DVD to choose DVD mode, then continue with other DVD features as described in this manual.

A maximum of 999 MP3/JPEG files can be recognized.

Power Failure

•Clock setting, language selection and channel setup may be lost if the power fails. See pages 21-23 to set up the channels, clock and language again.

The VCR will not record a TV program.

• Put the DVD/VCR in VCR mode. Press VCR or SOURCE so VCR light appears on the front of the DVD/VCR.

•Check the connections between the DVD/VCR,TV, antenna/Cable TV signal and Cable Box/Satellite Receiver (if applicable). Details are on pages 9-14. For VCR features, you must connect the DVD/VCR to a TV with the RF coaxial cable or the yellow video cable as described on pages 9-12.

•Make sure the video cassette has a record tab. Details are on page 24.

The VCR will not perform a timer recording.

•Make sure the recording start and stop times are set correctly. Details are on pages 28-29.

•Make sure a tape is in the VCR and the tape has a record tab. Details are on page 24. If, after programming a timer

recording, you press TIMER SET without putting a tape in the DVD/VCR,“ ” will blink on the display panel.

• If the record tab on a tape is missing, the DVD/VCR will eject the tape.“ ” will blink.

•Press TIMER SET to put the DVD/VCR in standby mode for the timer recording.

•Make sure the VCR clock is set. Details are on page 22.

• The VCR may not perform or continue a timer recording if the power fails.

•If you have a Cable Box/Satellite Receiver, set timer recordings differently. Details are on page 10.

•Finish programming a timer recording at least 5 minutes before it is set to begin.

•12 p.m. is noon; 12 a.m. is midnight.

There is no picture or the picture is noisy or has streaks during video cassette playback.

• Put the DVD/VCR in VCR mode. Press VCR or SOURCE so VCR light appears on the front of the DVD/VCR.

•If you used the supplied RF coaxial cable to connect the DVD/VCR to the TV, make sure the TV is on the same channel as the DVD/VCR’s output channel (03 or 04).The DVD/VCR’s output channel is channel 3 when you receive it.To change it to channel 4, see page 9. Make sure channel 03 or 04 is properly adjusted at the TV.

Or, if you connected the DVD/VCR to the TV using audio and video cables, select the correct Video In channel at the TV. Details are on pages 8 and 12.

•Adjust the tracking. Details are on page 33.

•TVs placed too close to the DVD/VCR can cause interference during tape playback. Move the DVD/VCR away from the TV.

The Number buttons won’t work for TV channels above 69.

•Enter channel numbers as a 2-digit number. If you want to select channels 100 and above, enter channel numbers as a 3-digit number. If you do not have Cable TV, only channels 2-69 are available.

TV programs cannot be watched normally.

•Check the connections between the DVD/VCR,TV, antenna/Cable TV signal and Cable Box/Satellite Receiver (if applicable). Details are on pages 9-14.

Poor reception

•You may need to tune your TV again. Or, reset channels at the VCR using CHANNEL SET UP. Details are on page 21.

Page 61 Page 63
Image 62
Page 61 Page 63
Contents Necesita ayuda Inmediata? Need help fast?Besoin dune aide Rapide? Proof of Purchase For Customer UseImportant Safety Instructions Declaration of Conformity Safety Information cont’dSafety Precautions BoxTable of Contents Introduction Playable Discs and Video Cassettes Hookups Determining the best possible connectionHookups cont’d Connections RememberRF coaxial cable TV’s Antenna SignalCable Composite or Baseband video Jack of your DVD/VCRDVD/VCR Audio OUT jacks on the DVD/VCR and to the red Video OUT jacks on the DVD/VCR and to the ComponentDVD/VCR to a TV and a Stereo Check your Stereo manual for detailsStereo Recycling Guidelines/Battery Safety Putting Batteries in the Remote ControlUsing the Remote Control First-time DVD/VCR Setup Read and follow the steps below to play a tape Other tape playback features are on pagesVideo Cassette Playback Turn on the TV. Insert a tapeOn the DVD/VCR Disc PlaybackPress OPEN/CLOSE a Insert a discVCR Display Panel Display PanelDVD Display Panel Display MessagesFront Panel Front Panel, Rear Panel and Remote ControlRemote Control Rear PanelChannel Setup Adding/Deleting ChannelsWhile the DAY space is flashing, press K or L until Press CLEAR/RESET or B to start the clockClock VCR While the Year space is flashing, press K or LVCR Status Displays Press CLEAR/RESET to remove the menuLanguage VCR Press Display again to remove all the displaysTo stop recording, press Stop C Videotape RecordingRecording Prevention Turn on the TV Insert a tape in the DVD/VCRPress VCR/TV on the DVD/VCR remote control to Use the TV remote control to select the channelRemote control to return to channel 03 or 04 at Press VCR, then press Record I to recordStopping an OTR When an OTR endsOne-Touch Recording Make the connections shown above Point the remote control at DVD/VCR 2. PressRerecording Tape Duplication Turn on the TV and set it to channel 03 or 04Timer Recording When a timer recording ends Timer Recording cont’dCancelling Timer Recordings Press K or L to select a recording tape speed. The arrowDVD to Videotape Duplication Speed are onRepeat Playback Tape CounterIndex Search Time Search, Index SearchTime Search A recording by following these stepsAutomatic Operation Features Special Effects PlaybackMulti-Channel Television Sound Multi-Channel Television Sound / Hi-Fi StereoUnderstanding Displays Hi-Fi StereoPlayback Control PBC Function Using the Title MenuMenus, Playback Control PBC Function Press K, L, s or B to select an item, then press OKPress Play B to return to normal playback During playback, press Search g or h on Remote controlFast Forward/Reverse Search To resume normal playback, press Play BTime Playback Title/Chapter Playback,Time PlaybackTitle/Chapter Playback Pressed within 30 seconds of the previous number Using SearchTrack Playback Begin or the current track will continue to playDuring disc playback, press Pause k. Playback will Paused and Step-by-Step PlaybackResume On Pause and the sound will be muteLet you start over OFF will appear briefly on Repeat, A-B RepeatRepeat To return to a Marker during playback, press MarkersWithin 30 seconds, press s or B to select a Marker Camera Angles Subtitles, Camera AnglesSubtitles Audio Language Audio Language, Stereo Sound ModeStereo Sound Mode During DVD playback, press Audio repeatedly toZoom Slow Motion, ZoomSlow Motion Press Pause F during DVD or Video CD playbackRandom Playback Program/Random PlaybackProgram Playback 46 MP3/Windows MediaTM Audio/JPEG Playback Press K or L to select a folder, then press Play B or OK Dual PlaybackFolder Playback Video CD and Audio CD Displays On-Screen DisplaysDVD Displays On-Screen Displays cont’d Press Display again to remove the displayBlack Level Black Level,Virtual SurroundInitializing Virtual SurroundInstructions continue on the next Language Codes Language cont’dInstructions from the previous Press s or B to select DISPLAY, then Press OK Select a setting, then press OKDisplay Press K or L to select an item, then press OKProgressive Scan You may adjust the Progressive Scan compatibilityDisplay cont’d If Progressive is ON, this message appearsPress s or B to select Custom at the top AudioWhile playback is stopped, press Menu, then press OKPress DVD to put the DVD/VCR in DVD mode. DVD Parental PasswordPassword CHANGE, then press OK While playback is stopped, press SYSTEM/MENUPress sor B to select Parental LevelsPress sor B to select Custom at the top Menu, then press OK PARENTAL, at the topOthers Press s or B to select OTHERS, then Press OKOthers cont’d If you selected Auto Power OFF, press OKRepeatedly to choose on or OFF.The default setting is ON. Choose on if you want the player to turn off whenGlossary Cable Box/Satellite Receiver Output Channel 03 orHelpful Hints Helpful Hints cont’d You cannot insert a video cassette Line Input modeCleaning the Video Heads You cannot remove the tapeCare and Maintenance SpecificationsLimited Warranty WHO is CoveredInformation Index Controls Dvd/vcr Remote

H982NUD specifications

The Philips H982NUD is an innovative hair dryer that combines advanced technology with user-friendly features, designed for both professional and home use. This model stands out in the market due to its remarkable efficiency and performance, making it a favorite among beauty enthusiasts.

One of the main features of the Philips H982NUD is its powerful motor, which ensures rapid drying while minimizing heat exposure. This is particularly important for maintaining hair health, as excessive heat can lead to damage over time. The dryer operates with a range of heat and speed settings, allowing users to customize their experience based on hair type and styling needs. With precise control, users can choose lower temperatures for fine or damaged hair and higher settings for thicker textures.

Another significant technology integrated into the Philips H982NUD is the ThermoProtect feature. This innovative technology helps regulate the temperature of the airflow to prevent overheating, ensuring that your hair remains at a safe temperature while drying. This not only protects hair from potential damage but also enhances shine, leaving locks looking healthy and vibrant.

The design of the H982NUD is both functional and aesthetic. It features an ergonomic handle for comfortable grip during use, reducing fatigue even during prolonged styling sessions. Additionally, the hair dryer is relatively lightweight, making it easy to maneuver. A long power cord adds to the convenience, providing ample reach while styling without the hassle of being tethered to a wall outlet.

The H982NUD also comes with an assortment of attachments that enhance its usability. The included concentrator nozzle allows for precise styling, making it easier to create sleek, straight looks or add volume through targeted airflow. A diffuser attachment is also available, perfect for enhancing natural curls and waves without disrupting their formation.

Overall, the Philips H982NUD hair dryer is distinguished by its balance of power, technology, and design. Its user-centric features make it an essential tool in any hair care routine, whether at home or in a salon. With a focus on hair health, ease of use, and versatility, the Philips H982NUD sets a high standard in the hair dryer market, catering to a diverse range of styling needs and preferences.
Top Page Image Contents