Philips DVP620VRDVP620VR Sorting TV channels manually, Setting the RF out channel

Page 9
→ P01: 02 P06: 90
P02: 03 P07: 99
P03: 05 P08: 121
P04: 10 P09: 124
P05: 74 P10: 130
SELECT K L CHOOSE B END=EXIT

Setting Up your DVD/VCR

Sorting TV channels manually

After you have performed the automatic channel search you may not agree with the sequence in which the individual TV channels have been allocated to the programme positions (pro- gramme numbers) of the DVD/ VCR.You can use this function to individually sort the TV channels already saved.

The clock resets automatically

If you save a TV channel that transmits VPS/ PDC or the Teletext on programme number ‘P01’, date and time will constantly be updated. As a result, time changes, i.e. daylight savings time, will be set automatically.

1Press VCR, then DISC/VCR MENU. MOVE

2 Press K/L to select “TUNER SET UP” , then press B.

3 Press K/L to select “MOVE” , then press B.

Setting the RF out channel

In some reception locations it is possible that a TV channel will be sent on the same or similar frequency as the DVD/ VCR. Result:As soon as the DVD/ VCR is switched on, the reception quality for this or several other TV channels will decrease.

The following steps will show you how to change the pre-set 'transmission' (RF out channel) frequency on the DVD/ VCR.

1Press VCR, then DISC/VCR MENU.

2Press K/L to select “INITIAL SET UP” , then press B.

What is RF out channel?

This electronic component in the DVD/ VCR allows the device to transmit audio and video signals via the aerial cable.These signals can be received on a TV set just like TV channels.

What is RF out channel frequency?

This frequency or channel indicates the channel on which the audio or video signal is transmitted.

4 Press K/L to select the saved TV channel that you want to change.

5

Confirm with B.

6

Move the selected channel with K/L to the programme num-

7

ber you want to assign.

Confirm with B.

8

To assign other TV channels to a programme number, repeat

9

steps 4 to 7.

Confirm the assignment of the TV channel with MOVE menu.

3Press K/L to select “RF OUT” , then press B.

4Press B.

5Press K/L or numerical key pads to select a free (not allocated) channel between channel 22 and 69 in your area.

6Press B.

7To end, press STATUS/EXIT.

SELECT K L CHOOSE B

→RF OUT CH 35

END=EXIT

10 To exit the MOVE menu, press STATUS/EXIT.

Setting the clock

If the display shows an incorrect time or “ --:-- ”, the time and date must be reset manually.

If a TV channel that transmits VPS/PDC or the Teletext is stored under programme number “P01”, time/date will auto- matically be taken from VPS/PDC or the Teletext information.

(SMART CLOCK)

1Press VCR, then DISC/VCR MENU.

2Press K/L to select “INITIAL SET UP” , then press B.

3Press K/L to select “CLOCK” , then press B.

4Check the time in “TIME”. If

required, please change the time

TIME --:--

with numerical key pads.

DATE --/--/--

5 Check “DAY”,“MONTH” and

 

“YEAR” in the same way.

SMART CLOCK [ON]

6Choose “SMART CLOCK” [ON]

or [OFF] with B.

END=EXIT

7To end, press STATUS/EXIT.

Time/date is displayed incorrectly despite manual setting

With Smart Clock, time/date is taken from the TV channel saved on 'P01'.

If you wish to switch this automatic time cor-rection off, select 'OFF' for Smart Clock.

You can reactivate this function at anytime by selecting 'ON' for Smart Clock.

If you cannot get an interference-free picture and sound, connect the DVD/ VCR and the TV with a scart cable.Then, switch the built-in modulator off.

Press L repeatedly until '--' appears next to 'RF OUT CH' on the TV screen.

Then confirm with B.

Decoder allocation

Some TV channels transmit encoded TV signals which can only be viewed with a purchased or rented decoder.You can con- nect such a decoder to this DVD/ VCR.The following function will automatically activate the connected decoder for the desired TV channel.

1Switch the TV on. If applicable, select the programme number for the DVD/ VCR operation.

2Press K/L or numerical key pads to select the TV channel which you would like to allocate

3

the decoder to.

MANUAL TUNING

 

Press DISC/VCR MENU.The main

PROG.

P55

 

menu will appear.

CHANNEL

055

4

Press K/L to select “TUNER SET

→ DECODER

[OFF]

SKIP

[OFF]

 

UP”.Then press B.

5

SELECT K L CHOOSE B

Press K/L to select “MANUAL

 

TUNING”.Then press B.

END=EXIT

 

 

 

 

6Press K/L to select “DECODER”.

7Press B to select “[ON]” (Decoder switched on).

How can I switch off the decoder?

Use B to select “[OFF]” (Decoder switched off).

8To end, press STATUS/EXIT.

The decoder has now been allocated to this programme num- ber.

9

Image 9
Contents Digital Video Disc Player General Information Contents Front Panel Functional OverviewDisplay Message RoupRear Panel Remote ControlConnecting to a TV Setting Up your DVD/VCRConnecting to an Audio System for DVD features Important for the United KingdomExternal Input Mode for VCR features Connecting to Optional Equipment for DVD featuresInserting batteries into the Remote Control Using the Remote ControlManual Channel Preset Video Channel SettingAutomatic Channel Setup Follow TV Automatic TV channels sortingSetting the clock Setting the RF out channelSorting TV channels manually Decoder allocationVCR Playback VCR Manual Recording Recording without automatic switch-offGeneral information Lining up recordings assemble cutDirect dubbing Copying a video tapeProgramming a recording With the Video Plus+ system Programming a recording without the Video Plus+ system Programming a Recording TimerOTR One Touch Recording Not CompletedHow to change a programmed recording How to check, or delete a programmed Recording TimerHint for Timer Recording Timer block disappeared when I pressed gOther Functions Playing a Disc Title / Chapter Search DVD-V Slow Forward / Slow Reverse DVD-VVCDTime Search RepeatStereo Sound Mode CD VCD Slide Show Mode JpegjpegOn-Screen Information MP3 Jpeg Random Playback CDSubtitle Language DVD-V Marker Setup Screen DVD-V CD VCDCamera Angle DVD-V Changing the On-Screen DisplayAudio Setting DVD SetupDisplay Setting DVD-V Language Setting DVD-VLanguage Code Cleaning the Cabinet SpecificationsCleaning Discs Cleaning the disc lensProblem Solution TroubleshootingOY Philips AB Philips Info Center Meet Philips at the Internet