Philips DVP3055V/01 owner manual Connections, Connecting to a TV & Decoder

Page 10
Connect the supplied RF antenna cable from the RF OUT jack on the rear panel of this unit to your television’s Antenna Input.

English

Connections

Tips

Depending on your TV and other equipment you wish to connect, there are various ways you could connect the unit.

Please refer to the manuals of your TV, Stereo System or other devices as necessary to make the best connections.

For better sound reproduction, connect this unit’s AUDIO OUT jacks to the audio in jacks of your amplifier, receiver, stereo or audio/video equipment. See “Connecting to optional equipment” on page 11.

Caution

Make sure this unit is connected directly to the TV. Set the TV to the correct video input channel.

Do not connect this unit’s AUDIO OUT jack to the phono in jack (record deck) of your audio system.

Connecting to a TV & Decoder

Make one of the following connections, depending on the capabilities of your existing equipment.

Basic connection (AV)

1 Connect the EURO AV1 AUDIO/VIDEO on the rear panel of this unit to the SCART input socket on the TV using a SCART lead.

2 Some TV broadcasters transmit encoded television signals which you can only see with a purchased or rented decoder.You can connect such a decoder (descrambler) to the DVD+VCR.

Basic connection (RF)

1 Connect the RF antenna cable from your indoor/ outdoor antenna to AERIAL jack on the rear panel of this unit.

2

DVD exclusive out connection

Component Video (Color Stream®) connection

1 Connect the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on the DVD Player to the corresponding in jacks on the TV using the Y Pb Pr cable.

2 Connect the Left and Right AUDIO OUT jacks of the DVD Player to the audio left/right in jacks on the TV using the audio cables.

S-Video connection

1 Connect the S-VIDEO OUT jack on this unit to the S- Video input jack on the TV using the S-Video cable.

2 Connect the Left and Right AUDIO OUT jacks of the DVD Player to the audio left/right in jacks on the TV using the audio cables.

Progressive Scan (ColorStream®Pro) connection

If your television is a high-definition or “digital ready” television, you may take advantage of the DVD Player’s progressive scan output for the highest video resolution possible.

If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD Player.

1 Connect the COMPONENT/ PROGRESSIVE SCAN VIDEO OUT jacks on the DVD Player to the corresponding in jacks on the TV using the Y Pb Pr cable.

2 Connect the Left and Right AUDIO OUT jacks of the DVD Player to the audio left/right in jacks on the TV using the audio cables.

Notes

Set the Progressive to “On” on the setup menu for progressive signal, see page 18.

Progressive scan does not work with the analog video connections (yellow VIDEO OUT jack) or S-VIDEO connection.

Rear of this unit (DVD exclusive out connection)

Rear of TV

AERIAL

VIDEO

COMPONENT VIDEO INPUT/

AUDIO INPUT

SCART INPUT

S-VIDEO INPUT

 

INPUT

 

PROGRESSIVE SCAN

 

 

 

Pr

Pb

Y

L

R

 

 

Decoder

Rear of this unit (Basic connection)

Note

If the TV has an S-video input, connect the DVD player with the S-video cable.When using an S-video cable, do not connect the yellow video cable.

10

Image 10
Contents DVP3055V Features Safety PrecautionsModel No Serial No Italiano English Français DeutschEspañol Contents Before Use Remote Control Operation RangePlayable Discs Before Use Cont’d PrecautionsAbout Symbols Selecting the Viewing SourceVCR Record Audio Jacks Video in Jack EjectTape Eject Channel 3Skip /FWD Skip to next chapter or track Remote ControlV/V left/right/up/down VIDEO/AUDIO OUTLeft/Right DVD/VCR OUT Rear PanelCoaxial Digital audio out jack DVD Exclusive OUT Connecting to a TV & Decoder ConnectionsConnections Cont’d Connecting to Optional EquipmentDigital Multi-channel sound Tuning in a video channel on your Before Operation VCR partPress System MENU. Press b or B to select SET. Press OK Setting the clock ManuallyTo set the colour system Press System MenuTuning in TV Stations Automatically How to using the main menuOthers Cable stations C02 C69, S01 S41 Tuning in TV Stations ManuallyPress 1 or 2 to select the PR SET Press OK Tune with 3 or 4 to find the required stationChanging the order of TV Stations Deleting TV StationsBefore Operation DVD part General ExplanationLanguage Initial SettingsDisplay Sample Freq. Frequency DVD AudioDolby Digital / Mpeg DVD Dynamic Range Control DRC DVDSelect Rating on the Lock menu then press Lock Parental ControlRating DVD If you forget your Security CodeAuto Tracking Operation with tapePlaying a tape SharpInstant Timer Recording ITR If Timer record events Overlap Timer recording using On Screen DisplayPress 1 to switch your DVD+VCR Standby mode Event that you wish to remove and replaceOperation with DVD and Video CD General FeaturesPlaying a DVD and Video CD Time Search DVD VCD2.0 PBCOff VCD1.1 DVD Video Discs Repeat Chapter/Title/OffVideo CDs, Repeat Track/All/Off Screen SaverSpecial DVD Features DVD MP3/Windows MediaTM Audio Operation with Audio and MP3/Windows MediaTM Audio DiscAudio CD Title and artist information is less than 32 charactersSearch CD MP3 PausePAUSE/STEP again Starting point Shuffle CD MP3Operation with Jpeg Disc Viewing a Jpeg disc JpegMaintenance and Service Programmed Playback CD MP3Tape Counter Memory Stop Additional OperationOn Screen Display Video Doctor Self-DiagnosisTo set the decoder Hi-Fi Stereo Sound SystemWide Screen Compatibility Last Condition Memory DVD CDCopying from DVD To VCR Special RecordingRecording from another video recorder Troubleshooting Symptom Cause CorrectionLanguage Code List Code LanguageCountry/Area Code List Code Country/AreaSpecification

DVP3055V/01 specifications

The Philips DVP3055V/01 is a versatile DVD player designed to enhance your home entertainment experience with a blend of advanced technology and user-friendly features. This model stands out for its ability to play a wide range of disc formats, including DVD, DVD-R, DVD-RW, CD, CD-R, and CD-RW. It even supports DivX playback, making it an ideal choice for those who enjoy watching movies downloaded from the internet.

One of the key highlights of the DVP3055V/01 is its high-quality video output. The player is equipped with progressive scan technology, which significantly improves picture clarity and smoothness. This feature enables the player to deliver an enhanced viewing experience, especially on larger screens where detail and sharpness are crucial. The player also supports a resolution of up to 720p, allowing you to enjoy your favorite films and shows in impressive quality.

In terms of connectivity, the Philips DVP3055V/01 offers a variety of outputs. It comes with standard composite video, S-video, and RGB outputs, ensuring compatibility with a range of TVs and monitors. Additionally, it features a robust audio output that can easily connect to home theater systems, allowing for an immersive audio experience.

The design of the DVP3055V/01 is sleek and compact, making it a perfect addition to any entertainment center. Its straightforward remote control makes navigation simple and intuitive, giving users easy access to playback options, settings, and more. The device also boasts a quick start feature, enabling users to get up and running in no time.

Another notable characteristic of this DVD player is its ability to play multimedia files via USB. By connecting a USB flash drive, users can access various formats, providing an additional layer of flexibility in viewership. This includes the ability to watch personal videos or view photos directly on your television screen.

Overall, the Philips DVP3055V/01 is a solid choice for anyone looking to enjoy their multimedia library with ease and quality. With its combination of format compatibility, advanced video technology, and user-friendly features, it caters to both casual viewers and dedicated movie enthusiasts alike.