Philips DVP3055V/01 owner manual Before Operation VCR part, Tuning in a video channel on your

English

Before Operation - VCR part

Tuning in a video channel on your

TV

Video channel (RF output channel) is the channel on which your TV receives picture and sound signals from the DVD+VCR through the RF cable.

If you have used a SCART lead you will not have to tune your TV, simply select the AV channel.The AV channel is already pre-tuned for optimum video playback on your TV.

Perform the following steps only if interference appears in the TV picture after you have moved to a different area or a new station has started broadcasting in your area, or if you change the connection from RF connection to AV connection, or vise versa.

1

2 Set the vacant position 36 on your TV.

3 Press 1on the remote control to enter the standby mode (the clock indicator will be dimmed).

4 Press and hold CHANNEL 3 or 4 on the DVD+

VCR for more than 4 secs.

RF 36 will appear in the DVD+VCR display.

The following picture will be displayed on the TV screen.

Using your DVD+VCR for the very first time

For the following steps we assume that you have just connected your DVD+VCR for the very first time.

To make tuning TV stations an easy task your DVD+VCR incorporates the Automatic Channel Memory System (ACMS).This system will automatically tune, store TV channels and set the clock (date & time) in your DVD+VCR.

1 Make sure that you have correctly installed your DVD+VCR.

Press 1 to turn on your DVD+VCR.

If the initial Menu Screen doesn’t appear on screen, make sure that you have tuned your TV to a video channel. Or if this is correct it may mean that your DVD+VCR is already tuned.

2 Press b or B to select the desired country. (A:Austria, B: Belgium,CH: Switzerland, D: Germany, DK: Denmark, E: Spain, F: France, I: Italy, N: Norway, NL: Netherlands, P: Portugal, S:Sweden, SF: Finland, OTHERS)

3 Press OK to start the automatic tuning process.

If the picture is snowy, move to step 5. If the picture is clean, press 1 on the DVD+VCR to finish.

5 Press CHANNEL 3 or 4 on the DVD+VCR to set the video channel to a vacant position between 22 and 68 which is not occupied by any local station in your area.

Note

The RF channel will not change until step 6 has been executed.

6 Press 1to store the new RF video channel into the DVD+VCR memory.

Now tune your TV set to the new DVD+VCR RF channel.

Note

If the TV picture was clear in step 4, do not retune your TV.

The TV station shown above may vary according to the area you live in.

4 Press SYSTEM MENU to remove the menus from the TV screen.