Philips 3834RV0048A manual Setting the clock Manually, To set the colour system, Press System Menu

Setting the clock Manually

The clock in your DVD+VCR controls time and date settings for your DVD+VCR.

The clock is set automatically during ACMS (Automatic Channel Memory System) when you DVD+VCR detects a channel that broadcasts a Teletext signal. If the broadcast signal is weak the clock will not be set and will require setting manually.

1 Press SYSTEM MENU. Press b or B to select SET. Press OK.

The auto adjust mode can be set to ‘OFF’ by pressing OK if you want to set the time manually.

	HH MM		DD MM YY
	- -	: - -	- - . - - . - - - - -
1 2				ACSS : ON
SET
				OK i

2 Use 3 or 4 on the remote control to alter the HOURS, MINUTES, DAY, MONTH and YEAR. Please note your DVD+VCR uses a 24 hour clock. e.g. 1pm will be displayed as 13:00.

The day of the week will appear automatically when you enter the year.

Before Operation - VCR part

To set the colour system

1 Press SYSTEM MENU.

2 The main menu will appear on the TV screen.

3 Press 1 or 2 to select the SYS and press OK.

4 Press 3 or 4 to select according to the COLOUR system used.

		AUTO
		PAL		1 2
	P		Pr-12	SET	SYS
REC		SETMESECAM
	R		ACMS		SYS
	fOSD			+ -	NIC
AUD	ON			DECO-	i
	OFF			DER

5 Press 2 to select the RF AUDIO.

Press 3 or 4 to select according to the RF AUDIO used.

	RF - I/I
	RF - B/G1		2
		Pr-12
REC	PSETRF - D/KSET			SYS
	R	ACMS		SYS
	fOSD	+	-	NIC
AUD	ON	DECO-		i
	OFF	DER

1 2

SET

6

HH	MM	DD	MM	YY
8 :	00	1	. 01 .	05	SAT
				ACSS : OFF
					OK i

Press SYSTEM MENU to remove the menus from the TV screen.

3 If you make a mistake press b or B and enter the correct details.

4 Press SYSTEM MENU.

13