Philips 3834RV0048A manual How to using the main menu, Tuning in TV Stations Automatically, Tip

Before Operation - VCR part

How to using the main menu

This VCR can easily be programmed by using the menus displayed on screen.

The menus are controlled from the Remote Control Handset.

1 Switch on your TV set and video recorder by pressing the

1button.

2 Press SYSTEM MENU button.

The main menu will appear on the TV screen.

Tuning in TV Stations

Automatically

If the TV broadcast signal is weak your VCR may not detect the necessary information and will not be able to store them correctly.To overcome this problem please turn to the MANUAL TUNING section on page 15.

1 Press 1 to turn on your VCR.

2 Press SYSTEM MENU button.

The main menu will appear on the TV screen. Press 1 or 2 to select the ACMS.

Press OK.

●REC - Timer recording setting (see p. 23).

●PR SET - Manual tuning setting (see p. 15).

●ACMS - ACMS (Automatic Channel Memory System) (see p. 14).

●SET - Date & clock setting (see p. 13).

●SYSTEM - To set the Colour TV System (see p. 13). RF AUDIO - To select the channel of audio output

according to your TV type (“I/I” for PAL I/I TV,“B/G” for PAL B/G TV,“D/K” for PAL D/K TV) (see p. 13).

●Dr. - To check a problem with your VCR (see p. 31).

●AUDIO - To select the channel for audio output

(see p. 32).

●F.OSD ON/OFF - To display the operational mode of your VCR (see p. 31).

●16:9/4:3 - To select the aspect ratio of your TV (see p. 32).

●DECODER - To use a pay-TV decoder (or Satellite) with your VCR (see p. 32).

●OPR - To improve the playback picture (see p. 21).

●NIC - To activate or deactivate the NICAM digital sound (see p. 32).

Tip

You can change the menu language on the DVD setup menu. (See the Menu Language on page 18.)

3 Press 1 and 2 to select the desired menu. Press OK and use 3 or 4 to select.

4 Press SYSTEM MENU to return to a TV picture.

3 Press OK again to start the automatic tuning process. The VCR’s clock will be set automatically when automatic tuning has finished. If the clock is wrong, see “Setting the clock manually” on page 13).

4 The TV STATION TABLE will appear when tuning is complete.

Press SYSTEM MENU to save your settings.