Philips 55PP 9352, 60PP 9352 manual Hd Input-Av

Page 57

Appendix A

COMPATIBILITY INFORMATION FOR THE TV’S HIGH-DEFINITION INPUTS	A

Your set’s HD inputs (HD INPUT-AV 4 and HD INPUT-AV 5) are designed to accept

high-definition signal standards 480p and 1080i as specified by the Electronic Industries Association. Output standards may vary by man- ufacturer. Refer to the directions-for-use manual for the digital equipment before connecting.

HD INPUT-AV 4

When the Inputs Are Used with Component Video Signals

Y INPUT: 1.0 Vp-p (includes sync), 75 ohms

Pr INPUT: 700m Vp-p, 75 ohms

Pb INPUT: 700m Vp-p, 75 ohms

NOTES:

Your TV’s HD input jacks are compatible with some digital equipment having RGB outputs with “sync on green” or RGB with “separate H and V sync.” As with HD component video signals, out- put standards may vary by manufacturer. Refer to the directions-for-use manual for the receiver before connecting.

HELPFUL HINTS

•No industry standards have been estab- lished for HD television RGB signal sys- tems, timing, synchronization, and signal strengths. The HD INPUT-AV 4 RGB inputs on your Philips TV will not be compatible with all digital equipment that offers RGB outputs. If the digital equip- ment you want to connect offers both component video and RGB, component video is the suggested type of connection to use.

•Your TV’s onscreen INSTALL submenu provides the option of switching the AV4 and AV5 signal sources between YPbPr and RGB color-space settings. The option is available only when have selected the either the AV4 or AV5 signal source (using the AV button on the remote or the Source Select button on the TV). The default settings are YPbPr for AV4, and RGB for AV5. See page 59.

The Pb INPUT jack can also receive signals from outputs labeled Cb or B-Y. The Pr INPUT jack can also receive signals from outputs labeled Cr or R-Y.

When the Inputs Are Used with RGB Video Signals

G/Y: 1.0 Vp-p, 75 ohms (compatible with sync on green)

R/Pr: 700 mVp-p, 75 ohms

B/Pb: 700 mVp-p, 75 ohms

H:3 Vp-p ± 1.0 V, 1 kohm (when using separate H and V sync)

V:3 Vp-p ± 1.0 V, 1 kohm (when using separate H and V sync).

HD INPUT-AV 5

G/Y: 1.0 Vp-p, 75 ohms (compatible with sync on green)

R/Pr: 700 mVp-p, 75 ohms

B/Pb: 700 mVp-p, 75 ohms

H:3 Vp-p ± 1.0 V, 1 kohm (when using separate H and V sync)

V:3 Vp-p ± 1.0 V, 1 kohm.(when using separate H and V sync)

57

Image 57

Contents Hdtv Monitor Warranty Verification Important Safety Instructions Contents Virtual Dolby* Surround referred to as Dolby Virtual FeaturesWhatYou Can Connect to Standard Panel Jacks Panel Overviews Standard Inputs and OutputsWhatYou Can Connect to High-definition Input Jacks Panel Overviews HIGH-DEFINITION InputsOO Ututvideorin Connecting a VCRANT Connecting and Using AN Audio HI-FI System with Your TV Connect from the Left and RightAudio OUT control Two cables for audio connections standard RCA connectors Connecting a Standard DVD PlayerRear of TV Connecting a DVD Player with PROGRESSIVE-SCAN CapabilityOne S-Video cable Connecting AN S-VIDEO DeviceConnecting AN HD Receiver to the HD INPUT-AV 4 Jacks Connect S-VIDEO and audio cables. Note This example usesConnect coaxial cables Rear of HD Receiver Connecting AN HD Receiver to the HD INPUT-AV 5 JacksAV3 Connecting a CamcorderConnecting and Using Headphones with Your TV VCR Programming the TV Remote to Work Accessory DevicesPlease read through all the steps before beginning Using the CODE-ENTRY Method to Program Your TV RemoteUsing the Search Method to Program Your TV Remote VCR DIRECT-ENTRY Codes for A/V Accessory DevicesTelevision CH & TV/VCR Using the TV Remote with Accessory DevicesSource you want to watch Using the AV and Source Select ButtonsAutoSound Options Using AutosoundColor Picture Using AutopictureSurf List Empty Using AutosurfProgram List CVI Using Program List and Alternate ChannelSleep Timer Control UsingPicture-adjustment Options Adjusting the Picture ControlsPress the STATUS/EXIT button to turn the menu off Setting the EYE Fidelity ControlPicture Sharpness Tint Setting the Dynamic Contrast ControlAdjusting the TREBLE, BASS, and Balance Controls Using the AVL Audio Volume Leveler Control Selecting the SURROUND-SOUND Modes Selecting a Surround-sound Option Using Remote ControlSelecting the STEREO/MONO Sound Mode Selecting the SAP Second Audio Program Feature Selecting SAP Using Remote ControlSelecting SAP Using TV Buttons Speakers Using the Bass Boost ControlFeatures Setting the ClockDisplaying the Time Time Setting the TIMER’S Start Time and Stop TimePress the Cursor Ring Right to enter the Features submenu Selecting the TIMER’S ChannelSetting the TIMER’S Activate Control Terms Understanding AutolockPG-13 Parents Strongly TV TV-Y7 Directed to OlderFeatures Setting UP the Autolock Access CodePIP Install Closed CAP Using Autolock to Block ChannelsPress the MENU/SELECT Using Autolock to Block by Movie RatingUsing Autolock to Block by TV Rating Control does not affect channel blocks see Turning the Autolock Blocking Control on or OFFUsing Autolock to Block Unrated Broadcasts Using Autolock to Block Broadcasts That have no Rating Press the STATUS/EXIT button on Reviewing Your Current Autolock SettingsMute Using the Closed Captioning ControlSelecting a Picture Format Using the Remote Control Using the PICTURE-FORMAT ControlSelecting a picture Format Using the TV Buttons Turning Active Control on or Off Using the TV Buttons Using Active ControlHD INPUT-AV Model SpecificationsInstall Setting Color Space for the HD InputsVideo-game images and scoreboards Care and CleaningTV has no power TroubleshootingYou are not able to get sound Glossary of Television Terms Index Washington/Baltimore call Philadelphia Factory Service LocationsHouston Page Projection Television Limited Warranty