8Customize settings
You can customize the settings of your Voice Tracer to suit the recording conditions and your personal preferences.
1Press the MENU button while the recorder is stopped.
•The display shows MODE and the current setting for recording mode is flashing.
2Press the + or – button to navigate the setting icons bar up or down.
3Press the h or b button to change the displayed setting. The new setting is automatically accepted (exceptions: the FORMAT and SPLIT functions must be confirmed by pressing the f button).
4Customize settings as required or exit the menu by pressing the MENU button.
Icon/ | Option | Description | |
Display | |||
|
| ||
|
|
| |
SLP |
| Choose among several recording modes | |
LP |
| including uncompressed PCM format, SHQ, | |
SP |
| HQ, SP, LP or SLP for a longer recording time. | |
HQ |
| Refer to chapter 11, Technical data on page 19 | |
SHQ |
| for details. | |
PCM |
|
| |
|
|
|
Icon/ | Option | Description | |
Display | |||
|
| ||
|
|
| |
| HI | Adjust the recording sensitivity to avoid | |
MIC | LO | recording background noises and to adjust to | |
| the recording environment. | ||
|
|
| |
| On | ||
VA | Off | ture for | |
| activated recording is enabled, recording will | ||
|
| start when you begin speaking. When you | |
|
| stop speaking, the recorder will automatically | |
|
| pause recording after three seconds of silence, | |
|
| and resume only when you begin speaking | |
|
| again. | |
|
|
| |
| On | Dynamic emphasis on quiet passages to | |
CLVOICE | Off | improve the intelligibility of quiet voices. | |
|
| ||
|
|
| |
| Yes | The recorder gives sound feedback about but- | |
BEEP | No | ton operations or errors. | |
|
| ||
|
|
|
Table of contents | Customize settings | 15 |