O K
7 Insert a cassette without erase protection
What is erase protection? |
|
VHS cassettes can be protected from |
|
breaking off a thin strip of plastic (arrow). This erase |
|
protection can be overridden by sticking one or more |
|
strips of adhesive tape tightly over the gap which has | PARDON? |
been created. |
8SWITCH OFF THE VIDEO RECORDER WITH THE STANDBY/ON BUTTON m ! IF YOU DON’T DO THIS, THE SET WILL NOT RECORD.
The display will show “k”
Problem solving (Turbo Timer programming)
PROBLEMSOLUTION
“k” will blink in the display
Error message:
“COLLISION”
Error message:
“FULL”
Cassette is ejected during recording
Cassette is ejected after programming
The set cannot be used during recording
Error message: “CLK”
A recording was programmed, but there is no cassette in the machine. Insert a cassette without erase protection ready for recording.
It is not possible to record two programmed recording at the same time. Please check the existing programmed recordings (see chapter “Delete / check / change programmed recordings”).
All the available memory locations in your video recorder for timer and VIDEO Plus programming are full. Delete a programmed recording (see chapter “Delete / check / change programmed recordings”).
The end of the tape was reached during a programmed recording.The recording could not be completed satisfactorily.
A cassette with erase protection was inserted. Please deactivate the erase protection or insert another cassette which is ready for recording.
Once started, a recording can only be interrupted by pressing the STANDBY/ON
button m. WARNING: This will not only stop the recording, but it will also delete the programmed recording from the memory of the video recorder.
The time has not been set or not set correctly. A Turbo Timer recording is not possible. Please enter the correct time (Section “Changing the time and date”)
PROBLEM SOLVING | 46 | ENGLISH |
|