Philips VR766, VR707 Using NexTView Link, Delete / check / change programmed recordings

Delete / check / change programmed recordings

TIMER

TIMER LIST

VPS

DATE PROG. START PDC END

21 01 20:00 * 21:30 SP

TOTAL RECORD TIME: 01:30

TO CHANGE	TO EXIT
PRESS P	PRESS TIMER

1Press the TIMER button k on the remote control

2Use =P- or ;P+ to select the option “TIMER RECORDING” and confirm with P

3In the display, use the button =P- or ;P+ to select the storage position you wish to check/change/delete

	What is a memory location?
	For technical reasons, your video recorder has access
	to a limited number of “drawers” in which you can
	store your programming requirements. “Drawers”
	occupied by programme recording details are only
	available for use again after the video recorder has
	successfully completed a programmed recording or if
	it has been manually deleted.Your video recorder can
			PARDON?
	store up to six timer programmings
4 Delete:		Press CLEAR (CL), confirm with
		the button OK (screen shows
		“TIMER CLEARED”) and finish
		with TIMER k
Check:		Press P, check the stored
		details and (once you have
		checked) end with TIMER k
Changing:		Press P, use =P- or ;P+ to
		select the entry fields to be alte-

red and use 0-9 to enter the new value(s). Confirm with OK and activate the timer again with the Standby button m.

Using “NexTView Link”

If your TV set supports the function “NexTView Link” there is another way in which you can quickly and simply programme recordings: With these TV sets, you can call up the transmission schedule of the TV channel, mark the programmes to be recorded and automatically transfer their details into the memory of the video recorder. Please look in the instructions for your TV set to find out whether and how you can benefit from this function.

ENGLISH 47 DELETE/CHECK/CHANGE RECORDINGS / NEXTVIEW