Philips 20MC4206 Optional Connections, Digital Stereo Hookups, To Coaxial jack On TV/DVD

Page 11

T9201UB_EN 3/7/06 11:06 AM Page 11

Digital Stereo Hookups

You can connect the TV/DVD to a Stereo that has a Digital Coaxial In jack. Use this hookup if you want to hear the TV/DVD sound through the Stereo instead. Use these connections for a Dolby Digital-compatible Stereo or for a Receiver that has a Mini-Disc or Digital Audio Tape deck.

1 Connect the antenna/Cable TV signal. Details are on pages 9-10.

2 Connect a digital audio coaxial cable (not supplied) to the COAXIAL jack on the TV/DVD. Also connect the cable to the Stereo’s COAXIAL DIGITAL AUDIO IN jack.

3 If the Stereo is Dolby Digital-compatible, set DOLBY DIGITAL to BITSTREAM. If the Stereo is not Dolby Digital-compatible or if you connected to a Mini-Disc or Digital Audio Tape Deck, set DOLBY DIGITAL to PCM. Details are on page 50. An incorrect setting causes noise distortion and damages speakers.

Optional Connections 11

To COAXIAL jack

on TV/DVD

COAXIAL

To Stereo’s

COAXIAL DIGITAL AUDIO IN jack

Helpful Hints

•You cannot use a Mini-Disc or Digital Audio Tape deck to copy Dolby Digital Multi-channel surround sound discs.

•If the disc is not recorded in Dolby Digital Multi-channel surround sound, you will not hear multi-channel sound even if you use the Digital Stereo hookup.

•To see if your disc is recorded in Dolby Digital, look for a Dolby Digital logo on disc or on its case.

•To see if your Stereo has Dolby Digital, look for a Dolby Digital logo on your Stereo. Or, refer to the Stereo owner’s manual.

Image 11

Contents Color TV with BUILT-IN DVD Player 20MC4206For Customer Use Dear Magnavox product ownerSafety and General Information Important Safety InstructionsDeclaration of Conformity Safety and General Information cont’dSafety Precautions Table of Contents Introduction Unacceptable Discs Playable DiscsRegion Codes Color SystemsUsing the Remote Control Before Using the TV/DVDRemote Control Battery Installation Battery SafetyConnect an Hooking Up the TV/DVDInstructions continue on the next Instructions from the previous Hooking Up the TV/DVD cont’dTo Stereo’s Coaxial Digital Audio in jack Optional ConnectionsDigital Stereo Hookups To Coaxial jack On TV/DVDRemote Control Buttons Remote Control Buttons cont’d Front Panel Coaxial jack Power CordRear Panel ANT. jack AntennaConfirm the antenna or cable connection and 2,4 Initial SetupsFirst Time You Turn on the Unit To select FRANÇAIS, press CHPress VOL. X/Y to adjust the volume To update your memorized and non-memorized channels, seePlaying a Disc Auto Channel Programming Menu Language, Auto Channel ProgrammingMenu Language To delete another channel, repeat steps Press SET-UP when you are finishedAdding/Deleting Channels Indicates whether you connected an Antenna TV orPicture Controls Within 10 seconds, press s or B to adjust Picture controlMinutes between 10 to 120 minutes. Each press Sleep TimerPress PICTURE/SLEEP once. Sleep Will appear at the buttonPress SET-UP Press or to select Caption Closed CaptionsPress or to select TV Rating Then, press Enter Setting V-ChipTV Rating Settings TV Rating ExplanationsDetails are on pages Setting V-Chip cont’dPress or to select TV Rating Press Enter Press or to select V-CHIP SET UP Press EnterTV Rating Subratings Press SET-UPPress or L to select the rating you wish to Adjust. Then, press Enter twice to go to itsWhen you select TV-Y7 When you select TV-PG, TV-14 or TV-MAMpaa Rating Explanations Mpaa Rating SettingsPress or to select Change Code Then, press Enter Changing the Access CodeV-CHIP SET UP Screen will reappear Playback Control PBC Function DVD Disc Menus,Title MenusDisc Menus Title MenusPress Play B to return to normal playback Fast Forward/Fast ReverseTime Search Chapter/Title/Time SearchChapter Search Title SearchTo select 2 digit track number Using the Number ButtonsTrack Search Track SearchResume On Paused and Step-by-Step Playback, Resume OnPaused Playback Step-by-Step Playback Repeat Repeat, A-B RepeatPress or repeatedly until the Marker Marker Setting/Marker SearchDuring disc playback, press Mode repeatedly MarkersPress or repeatedly to change the language Subtitles, Camera AnglesSubtitles Camera AnglesZoom Slow Motion, ZoomSlow Motion Stereo Sound Audio Language, Stereo SoundAudio Language Example English AudioVideo CD and Audio CD Display On-Screen DisplaysDVD Display Press Display again to remove the display On-Screen Displays cont’dMP3/Windows MediaTM Audio/JPEG Displays Initializing Black Level, Virtual Surround, InitializingBlack Level Virtual SurroundRandom Screen appears Random Playback, Program PlaybackRandom Playback Program PlaybackTo stop playback, press Stop C 44 MP3/Windows MediaTM Audio/JPEG PlaybackTo remove the On-Screen Display, press Return Folder Playback See pages 54-55 on how to set the Dual Playback on or OFFDual Playback, Folder Playback Dual PlaybackQuick Setup Screen appears Language SettingsLanguage Codes Language Settings cont’dPress s or B to select press Enter Display SettingsPress SET-UP once so the TV Setup Menu appears Quick Setup Screen will appearPress SET-UP to exit the menus This setting is possible only if the DVD wasPress K or L to select an item, then press Screen and may call it the regular or normal formatDolby Digital sound must be available on the DVD Audio SettingsPress s or B to select Custom at the top Menu, then press EnterAThe display shown below will appear Parental SettingsPress s or B to select Parental Then press EnterPress or to select a level, then press Display shown below will appearIt. Press ENTER. The previous menu will reappear Parental Settings cont’dChanging the Parental Password Press the Number buttons to enter a 4-digitPress s or B to select OTHERS, then Press Enter Quick Setup Screen will appearOthers If you selected Angle ICON, press Enter Others cont’dGlossary Electrical Shock and Fire Hazards TV/DVD has no powerHelpful Hints LocationHelpful Hints cont’d Terminals Tuner channels Antenna VHF/UHF/Cable TV 125 General TV Electrical SpecificationsOther Specifications General DVDMagnavox Limited Warranty Ninety 90 DAY Labor / ONE 1 Parts Limited WarrantyControls IndexMemo Memo 20MC4206