Manual TV channel search, Satellite receiver

P pAB

Manual TV channel search

In certain cases the ’Automatic TV channel search’ may not be able to find all of the TV channels (e.g. coded TV channels). In that case, use this manual method to set the channels.

aPress the MENU button on the remote control. The main menu will appear.

b Select the line ’Installation’ with the P rB or

AP q button and confirm with the SqC button.

c Select the line ’Manual store’ with the P rB or AP q button and confirm with the SqC button.

iIf you want to change the automatic tv channel setting, select the line ’Fine tuning’.

With the DSr or SqC button you can vary the automatic tv channel setting. Important: This re-tuning is only necessary and useful in special cases, e.g.: when there are stripes on the picture with cable-TV systems.

jPress the OK button to store the TV channel.

D If you want to search for further TV channels, start again at step e.

k To end, press the MENU button.

MANUAL STORE

Channel/Frequency FREQU.

Search125

Fine tuning (,,,,,,n=,,,,,,$

Name edit	xxx
Programme number	01
Decoder	OFF

ã Exit:

« press MENU

dIn the line ’Channel/Frequency’, select the display for:

’FREQU.’: frequency

’C CH’: channel

’S CH’: special channel

eIf you know the frequency or channel of the desired TV channel, you can enter the data in line ’Search’ with the digit buttons 0-9 .

DIf you don’t know the frequency or channel of the TV

channel of your choice, press the SqC button to start the channel search.

fIn the line ’Programme number’ select the programme number you want e.g.: ’01’, using the DSr or SqC button.

gIf you want to change the TV channel name, press the SqC button in line ’Name edit’.

ESelect the character you want to change with the DSr or the SqC button. Change the character

with the P rB or the AP q button. Select the next character in the same way.

hPress the OK button to store the changes you have made.

Satellite receiver

You can receive channels from the satellite receiver via the scart socket EXT.1 .

To do this, select the channel number ’E1’ with the button. You will have to select the channels to be

received by the satellite receiver on the receiver itself.

Special installation functions

You can select one of the following installation functions in order to adapt your TV-VIDEO Combi to your own specific requirements.

Automatic TV channel search

Your TV-VIDEO Combi will search for all TV channels.

If you want to start the automatic TV channel search again, then follow the instructions below.

aPress the MENU button on the remote control. The main menu will appear.

b Select the line ’Installation’ with the					P rB		or
		button and confirm with the		button.
	AP q		SqC
c Select the line ’Autoinstall’ with the						or
				P rB
		button.
	AP q