Philips 14PV125/07 Front of the device, Back of the set, Control lights at the front of machine

Front of the device

VIDEO AUDIO

P

STANDBY

yStandby/on: To switch TVCR on or off, interrupt menu function.

5Volume: In connection with the button + , – to adjust the volume.

P- Programme number minus: previous programme number

P+ Programme number plus: next programme number

IRecord: To record the programme currently selected.

BPlayback: To play a recorded cassette.

C/A Pause/Stop, eject cassette: To stop the tape; If this key is depressed while in STOP, the cassette is then ejected from the machine.

1When tape playback is stopped, press to fast forward the tape at hight speed.

0When tape playback is stoped, press to rewind the tape at hight speed.

Sockets on the front:

White socket / AUDIO input socket: To connect a camcorder or video games (audio).

Yellow socket / VIDEO input socket: To connect a camcorder or video games (video).

Small socket / socket for headphones: To connect headphones.

Back of the set

EXT/AV1

Aerial input socket: To connect the aerial cable

EXT1/AV1 Scart socket :To connect a satellite receiver, decoder, video recorder, etc

Power switch: To switch the TV-Video Combi off.

Caution: If you switch off using the power switch, TIMER-recordings are impossible!

The control lights at the front of machine

STANDBY Standby light: lights up when the TV-Video Combi has been switched on by means of the main switch.

RECORD Recording light: lights up during recording.

Fast blink: recording pause, timer recording not stand-by.

Slow blink: timer recording is stored in a timer block.

3 EN