7. Programming a recording (TIMER)
General information | Programming a recording |
Use a TIMER programming to automatically start and stop a recording at a later time or date. The
*the programme number of the TV channel *the start and stop time of the recording *PDC on or off [14PV225]
This information is saved in a TIMER block.
[14PV225]
What is 'PDC'?
'PDC' (Programme Delivery Control) is used to control the start and duration of TV channel recordings. If a TV programme starts earlier or ends later than scheduled, the
What do I need to know about 'PDC'? Usually the PDC time is the same as the start time. But if your TV guide shows a PDC time which is different from the programme’s sched- uled start time, e.g. 20.10 (PDC 20.14), you must enter the PDC time exact to the minute. If you want a start time different from the PDC time, you must switch PDC off.
1.Press MENU . The main menu will appear.
PLAY | STOP | . Then |
2.Select 'TIMER' with |
|
press FWD 1- B .
3.Select ONCE, DAILY, or WEEKLY recording with PLAY 
STOP
FWD 1- B .
SELECT K L CHOOSE B
→ONCE
DAILY WEEKLY TIMER LIST
END=EXIT
If all TIMER blocks are in use, 'FULL' will appear on the TV screen.
4.Select the desired TIMER block with 0..9 .
Selecting once/daily/weekly recordings Use PLAY 
STOP
'ONCE': Recording once
'DAILY': Repeated daily recordings from Monday to Friday
'WEEKLY': Repeated weekly recordings (every week on the same day)
5.Enter the Start time (START) End time (STOP), Programme number (PROG.), PDC information and the Date with 0..9 .
Programming a recording from the external sources
You can also programme recording from an external source via the Scart socket AV1 or the front A/V connectors AV2.
6.When all inputs are correct, press
STATUS/EXIT . The programming information is stored in a TIMER block.
7.Insert a cassette with an intact security tab (unprotected).
EN | 12 |
|