Sharp PG-A10X Using the “Options” Menu, Lamp Timer Life Check, OSD Display Setting On

Using the “Options” Menu

You can use the “Options” menu to enhance the usage for the projector. For operation of the menu screen, see pages 32 to 35.

Example: “Options” menu screen for

INPUT 2 (S-Video) mode

Lamp Timer (Life) (Check-	OSD Display (Setting On-
ing the Lamp Life Status)	screen Display)
You can confirm the cumulative lamp usage time	This function allows you to turn the on-screen mes-
and the remaining lamp life (percentage).	sages on or off.

Display the “Options” menu to check the lamp life status.

Description of Lamp Life

Lamp usage condition		Remaining lamp life
		100%	5%
Used with only “	”		about
(Eco mode) in “Eco		4,500 hours	225 hours
Mode”
Used with only “	”		about
(Standard mode) in		3,000 hours	150 hours
“Eco Mode”

Select “” (ON) or “” (OFF) in “OSD Display” on the “Options” menu.

Description of “OSD Display” Settings

Selectable settings	Description
ON	All On-screen Displays are displayed.
OFF	INPUT/VOLUME/AV MUTE/FREEZE/
	AUTO SYNC/ENLARGE/ “An invalid
	button has been pressed.” / “All buttons on
	Projector are locked.” are not displayed.

Note

•It is recommended that the lamp be changed when the remaining lamp life becomes 5%. For lamp replacement, contact your nearest Sharp Authorized Projector Dealer or Service Center.

•The table above indicates rough estimates in the case of using only in each mode shown. Remain- ing lamp life changes within the range of the val-

ues shown depending on the frequency at which

“Eco Mode” is switched to “” (Eco mode) and “” (Standard mode) (see page 45).

-44