Sharp PG-A10X Computer Image Adjustment, Adjusting the Computer Special Modes Special Image

Computer Image Adjustment

Using the “Fine Sync” menu, you can adjust the computer image, match the computer dis- play mode, and check the input signal. For operation of the menu screen, see pages 32 to 35.

Example: “Fine Sync” menu screen for

INPUT 1 mode

Adjusting the Computer	Special Modes (Special
Image	Mode Settings)

In case of irregularities such as vertical stripes or flickering in portions of the screen, adjust “Clock”, “Phase”, “H-Pos” or “V-Pos” to obtain an optimal computer image.

Select the item on the “Fine Sync” menu and adjust the computer image.

Description of Adjustment Items

Selectable items	Use \ and to
Clock	adjust vertical noise.
Phase	adjust horizontal noise (similar to tracking
	on your VCR).
H-Pos	center the on-screen image by moving it to
	the left or right.
V-Pos	center the on-screen image by moving it up
	or down.

Note

•You can automatically adjust the computer im-

age by pressing on the projector or on the remote control.

•To reset all adjustment items, select “Reset” and

press .

Ordinarily, the type of input signal is detected and the correct resolution mode is automatically selected. However, for some signals, the optimal resolution mode in “Special Modes” on the “Fine Sync” menu may need to be selected to match the computer dis- play mode.

Select “Special Modes” on the “Fine Sync” menu and the appropriate resolution.

Note

•Avoid displaying computer patterns which repeat every other line (horizontal stripes).

(Flickering may occur, making the image hard to see.)

•When a DVD player or Digital Video is connected, select 480P as the input signal.

•See “Signal Info (Checking the Input Signal)” on the next page for information on the currently se- lected input signal.

-38