3 Press 
, 
or 
on the remote control to select the IN- PUT mode.
•After pressing 
once on the projector,
use 
to select the desired input mode. 
Note
•When no signal is received, “NO SIG- NAL” will be displayed. When a signal that the projector is not preset to re- ceive is received, “NOT REG.” will be displayed.
•The INPUT mode is not displayed when “OSD Display” is set to “OFF”. (See page 44.)
About the INPUT mode
INPUT 1 | Used for projecting im- |
(RGB/ | ages from equipment that |
Component) | sends RGB signals or |
| component signals con- |
| nected to the RGB input |
| terminal. |
INPUT 2 | Used for projecting im- |
ages from equipment | |
| connected to the S- |
| VIDEO input terminal. |
INPUT 3 | Used for projecting im- |
(Video) | ages from equipment |
| connected to the VIDEO |
| input terminal. |
|
|
4 Press 
or 
on the remote control to adjust the volume.
Note
•Pressing 
will lower the volume.
Pressing 
will raise the volume.
•On the projector, the volume can be
adjusted by pressing 
or 
.
5 Press | on the remote con- |
trol to temporarily display a black screen and turn off the sound.
Note
•Pressing 
again will turn the pro- jected image and sound back on.
|
| ➝ | ||
INPUT 1 mode | ||||
|
|
| ||
Using RGB |
|
|
| |
|
|
|
| |
Using
Component
INPUT 2 mode |
| ➝ | |
|
|
| |
Using |
|
| |
|
|
|
|
INPUT 3 mode | ➝ | ||
|
| ||
|
| ||
Using Video |
|
| |
|
|
|
|
Basic Operation
-27
