Sharp PG-A10X Connecting to Component Video Equip- ment, Connections and Setup, Optional, cable

Connecting to Component Video Equip- ment

Use a 3 RCA to 15-pin D-sub cable when con- necting to the INPUT 1 terminal, component video equipment such as DVD players and DTV* decoders.

*DTV is the umbrella term used to describe the new digital television system in the United States.

1 Connect the projector to the video equipment using the 3 RCA to 15-pin D-sub cable.

2 Connect the projector to the video equipment using a ø3.5

mmminijack to RCA audio cable (commercially available).

Note

•When connecting the projector to the video equipment in this way, select “Component” for “Signal Type” in the “Picture” menu. See page 37.

•A ø3.5 mm minijack to RCA audio cable (commercially available) is required for au- dio input.

Optional	3RCA to 15-pin D-sub cable
	Type: AN-C3CP
cable
	(9'10" (3.0 m))

To analog component output terminal

To audio output terminal

DVD player or

DTV* decoder

13 RCA to 15-pin D-sub cable (sold separately)

2ø3.5 mm minijack to RCA audio cable (commercially available)

Connections and Setup

-19