If you want to change the keycode, follow the procedure below.

Note

When “Anti-Theft” is selected, the password in- put box will appear. After the password has been entered, you can change the keycode.

1 Press the buttons on the remote control or the projector to enter the preset 4-digit keycode in “Old Code”.

2 Press any button you like on the re- mote control or the projector to en- ter the new keycode.

3 Enter the same 4-digit keycode in “Reconfirm”.

Note

If you do not want to set a keycode, leave the keycode field blank in steps 2 and 3 and press .

Easy to Use Functions

-49

Page 53
Image 53
Sharp PG-A10X operation manual Easy to Use Functions