Sharp PG-A10X Picture Display Mode, Switching the Picture Dis- play Mode, Press, Undo, button

Picture Display Mode

This function allows you to modify or customize the picture display mode to enhance the input image. Depending on the input signal, you can choose “NORMAL”, “DOT BY DOT”, “BORDER” or “STRETCH” image.

Switching the Picture Dis- play Mode

Press .

•Pressing changes the display as shown on pages 40 and 41.

•To return to the standard image, press while “RESIZE” is displayed on the screen.

UNDO
button	RESIZE
	button

COMPUTER
	NORMAL			DOT BY DOT		BORDER		STRETCH
	PG-A10X	PG-A10S	PG-A10X		PG-A10S	PG-A10X	PG-A10S	PG-A10X	PG-A10S
SVGA (800 ⋅ 600)			800	⋅ 600	—
XGA (1024 ⋅ 768)	1024 ⋅ 768	800 ⋅ 600		—	1024 ⋅ 768	768 ⋅ 576	600 ⋅ 450	1024 ⋅ 576	800 ⋅ 450
4:3 aspect ratio			1280 ⋅ 960		1280 ⋅ 960
SXGA (1280 ⋅ 960)
SXGA+ (1400 ⋅ 1050)			1400	⋅ 1050 1400 ⋅ 1050
SXGA (1280 ⋅ 1024)	960 ⋅ 768	750 ⋅ 600	1280	⋅ 1024 1280 ⋅ 1024		720 ⋅ 576	562 ⋅ 450	960 ⋅ 576	750 ⋅ 450
Other aspect ratios	—	—		—	—	—	—	1024 ⋅ 576	800 ⋅ 450
1280 ⋅ 720

Input Signal

Output screen image

NORMAL	DOT BY DOT	BORDER	STRETCH
Projects a full screen	Projects the original	Projects 4:3 image fully	Projects 16:9 image

Computer

PG-A10X PG-A10S

Image type

image while maintaining	resolution signal		in STRETCH (the following		evenly over entire screen
the aspect ratio.		of the image.		column) image.	(top/bottom blank bands).
*	*		*

Resolution Resolution lower than lower than

XGA SVGA

4:3 aspect ratio

XGA SVGA

4:3 aspect ratio

Resolution Resolution higher than higher than

XGA SVGA

4:3 aspect ratio

SXGA (1280 ⋅ 1024)

5:4 aspect ratio

1280 ⋅ 720

16:9 aspect ratio

* *

* *

* *

*

*Mode for projecting an image with the original aspect ratio without cutting any portions.

:Cutout area on which images cannot be projected.

:Area where the signals are off screen.

-40