Power Base-1 & 460CSL Amplifier Service Manual

Introduction

This manual contains service information on Crown power amplifiers. It is designed to be used in conjunc- tion with the applicable Owner's Manual. However, some important information is duplicated in this Ser- vice Manual in case the Owner's Manual is not readily available.

NOTE: THE INFORMATION IN THIS MANUAL IS INTENDED FOR USE BY AN EXPERIENCED TECHNICIAN ONLY!

SCOPE

This Service Manual includes several sections. These sections include Parts Ordering, Specifications, Volt- age Conversion, Circuit Theory, Factory Test Proce- dures, Mechanical Parts Lists, and Module Parts Lists. Schematics are attached. Note that component parts with circuit board comprise a complete module. Mod- ule part numbers are always associated with a spe- cific circuit board, although an unpopulated circuit board may be built up with different parts to create different modules. Note that Crown does not sell blank (unpopulated) circuit boards.

Each of the compact audio power amplifiers are designed for professional or commercial use. Provid- ing high power amplification from 20Hz to 20KHz with minimum distortion, they feature balanced inputs with bridged and parallel monophonic capability. Specific features vary depending on model family.

WARRANTY

Each Owner's Manual contains basic policies as re- lated to the customer. In addition it should be stated that this service documentation is meant to be used only by properly trained service personnel. Because most Crown products carry a 3 Year Full Warranty (including round trip shipping within the United States), all warranty service should be referred to the Crown Factory or Authorized Warranty Service Center. See the applicable Owner’s Manual for warranty details. To find the location of the nearest Authorized Service Center or obtain instructions for receiving Crown Fac- tory Service please contact the Crown Technical Sup- port Group (within North America) or your Crown/ Amcron Importer (outside North America).

Crown

Technical Support Group

Factory Service

Parts Department

Mailing Address:

PO Box 1000

Elkhart, IN USA 46515-1000

Shipping Address:

57620 C.R. 105

Elkhart, IN USA 46517

Phone: (219) 294-8200

Toll Free: (800) 342-6939

FAX: (219) 294-8301

4

Page 4
Image 4
Crown 460CSL service manual Introduction, Scope, Warranty

460CSL specifications

The Crown 460CSL is a powerful combination of innovation and performance that redefines efficiency in the material handling industry. Designed for heavy-duty tasks, this electric lift truck offers an impressive range of features that cater to the demands of modern warehouses and distribution centers.

One of the standout characteristics of the Crown 460CSL is its advanced ergonomic design, which prioritizes operator comfort and productivity. The spacious operator compartment is designed to minimize fatigue during extended use, featuring a low step-in height for easy access and a fully adjustable seat that provides optimal support. The intuitive controls are positioned for easy reach, allowing operators to maneuver the lift truck with ease and precision.

At the heart of the Crown 460CSL is its robust AC motor technology. This powerful motor provides rapid acceleration and smooth operation, reducing both energy consumption and maintenance needs. The regenerative braking system helps to extend battery life by converting braking energy back into stored energy, making the lift truck more efficient during operations. Operators benefit from enhanced traction and stability, ensuring dependable performance on various surfaces.

The Crown 460CSL boasts industry-leading lifting capabilities, with a maximum lifting capacity often exceeding competitors. Its precision-engineered mast allows for smooth and steady lifting of heavy loads, while its advanced hydraulic system provides reliable control over load placement. The lift’s extended height options enable operators to handle tasks at varying elevations, from ground level to tall shelving systems, with confidence.

Safety is a top priority for Crown, and the 460CSL incorporates several features designed to protect both operators and the loads being handled. The truck is equipped with a comprehensive suite of safety features, including an integrated stability system, load monitoring capabilities, and a visibility-enhancing overhead guard. These features work together to provide operators with greater awareness of their surroundings, reducing the risk of accidents.

In terms of technology, the Crown 460CSL integrates advanced diagnostics and connectivity features. This enables fleet managers to monitor performance, track usage patterns, and schedule maintenance with ease. Remote access to diagnostic information ensures that any potential issues can be identified and resolved promptly, further enhancing the truck's reliability and efficiency.

In conclusion, the Crown 460CSL stands out in the crowded lift truck market due to its combination of ergonomic design, powerful motor technology, impressive lifting capabilities, and enhanced safety features. This electric lift truck is an excellent choice for businesses seeking to improve productivity and reduce operational costs while maintaining a safe and comfortable working environment for their operators.