Philips CCB190AT, CCB 132AT, CCB 192AT owner manual Helpful Hints cont’d

Page 56

56 Helpful Hints (cont’d)

The remote control is not available, or the remote control will not access the pop up menu.

•Use the buttons on the front panel of the TV/VCR to access the pop up menu. You can not enter num- bers (for example, to program a timer recording) using the front panel buttons. Details are on page 20.

TV/VCR has no power.

•Make sure the power plug is completely connected to an AC (alternating current) outlet.

TV/VCR power shuts off after 15 minutes.

•To save energy, the TV/VCR will shut itself off after 15 minutes when it is on a channel that is not receiving a broadcast signal (for example, a station that has gone off the air for the night). This is normal.

Channel reception is poor.

•Check connections, then set up the channels again. Details are on page 10.

TV/VCR does not have a picture.

•Adjust the antenna. Details are on page six.

•Adjust the TV/VCR picture controls. Details are on pages 24-25.

TV/VCR has poor sound or no sound.

•Adjust the volume.

•Press the MUTE button to restore the volume.

Tape playback is poor or tape is destroyed.

•Adjust the tracking. Details are on page 52.

•If moisture has accumulated in your TV/VCR, keep the power on for at least two hours, but do not try to play a tape. Details are on page 55.

TV/VCR does not display closed captions.

•Make sure COUNTER ONLY is set to OFF. Details are on page 26.

•Make sure closed captioning is available for the program. Refer to the TV listings in your local newspa- per.

Remote control does not operate TV/VCR.

•Aim the remote control directly at the TV/VCR’s remote sensor. Details are on pages five and 20.

•Remove all obstacles between the remote control and the TV/VCR.

•Inspect and replace the batteries in the remote control. Details are on page five.

Number buttons won’t work for channels above 69.

•Enter channel numbers as a two-digit number. If you want to select channels 100 and above, enter chan- nel numbers as a three-digit number. Details are on page 22.

•If you are using an antenna, only channels 2-69 will be available.

A tape can’t be inserted into the TV/VCR.

•Insert the tape window side up, with the record tab facing you.

•Make sure a tape isn’t already in the TV/VCR by pressing the STOP/EJECT button on the TV/VCR.

•Gently push on the center of the tape. Never force a tape into the TV/VCR.

•If a timer recording is set and the TV/VCR power is off, the TV/VCR will eject the tape if the record tab is missing.

A tape can’t be removed from the TV/VCR.

•Make sure the power plug is completely connected to an AC (alternating current) outlet.

•If a timer recording is programmed, turn on the TV/VCR power, then eject the tape. Be sure to insert a tape and turn off the TV/VCR power for the timer recording.

TV/VCR ejects the tape when you try to start a recording.

•Make sure the tape has a record tab. Details are on page five.

The cylinder rotates when tape playback is stopped.

•To enable the quick play mechanism, the cylinder will rotate for about five minutes. This is normal. The quick play mechanism switches the tape mechanism from Stop to Play in just one second.

Page 55 Page 57
Image 56
Page 55 Page 57
Contents CCB130AT CCB132AT CCB190AT CCB192AT Dear Philips product owner For Customer UseFeatures Safety PrecautionsIntroduction Philips Consumer Electronics Company recommends that youTable of Contents Putting Batteries in the Remote Control Using the Remote ControlTV/VCR Maintenance Recording PreventionRod Antenna Hook up your TV/VCR using one of the connections shownHooking Up the TV/VCR Hooking Up the TV/VCR cont’d Crooked Pin Straight PinYou cannot set up channels if you are using a Cable Box Turning On the TV/VCRLanguage Selection Press the Menu buttonAutomatic Channel Setup Adding/Deleting Channels Press the PLAY/ o button or the STOP/ p button to selectCable Box users must set the clock manually Setting the ClockManual Clock Setting Setting the Clock cont’d Setting the Clock cont’d Automatic PBS Channel SelectionWait for the TV/VCR to find Manual PBS Channel Selection Press the PLAY/ button or the STOP/ button to Select SET PBS CH. MANUAL. Then, press the F.FWD/BButton Use the Number buttons to select your PBS stationDaylight-Savings Time Time Zone Front Panel ANTenna Jack AC Power CordRear Panel Remote Control Buttons STOP/ Button REWind/ ButtonSTATUS/EXIT Button Menu ButtonAdjusting the Picture Controls Adjusting the Picture Controls cont’d Decrease IncreaseOn-Screen Status Displays If you select Status ON, then select Counter only OFFIf you select Status ON, then select Counter only on If you select Status OFFPress the PLAY/ button or the STOP/ button to select ReminderPlaying VHS Quasi Play Back SqpbRecording To stop recording, press the STOP/ button Tape SpeedsOne-Touch Recording OTRRerecording Tape Duplication Different brands of equipment may operate differentlyTimer Recording DailyTimer Recording cont’d Timer Recording cont’d Checking or Clearing Timer Recordings Gram Review and press the F.FWD/B buttonDefeat Recording Repeat Play B Repeat Play Insert a tape in the TV/VCR Press the Menu buttonRepeat Play cont’d Press the STATUS/EXIT button to remove the menu. A-BReal-Time Counter Memory Press the STATUS/EXIT button. The real-time counter willPlayback Options Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Viewing a Still PictureSmartLock SmartLock cont’d Example Specific RatingsTo change the access code, follow these steps Rating Explanations Blue Background GroundSleep Timer Press the SLEEP/WAKE UP buttonWake Up Timer Timer Sleep Wake UP TV on ON-TIMEClosed Caption ExampleMenu ScreenClosed Caption cont’d Half-screen textVolume Bar Automatic Operation Features Specifications Glossary Helpful Hints Helpful Hints cont’d Renewed Index Stop/p buttonPage Supplied Accessories
Top Page Image Contents