Philips CCB 192AT, CCB 132AT, CCB190AT owner manual Blue Background, Ground

Page 46

46 Blue Background

If you want the TV screen to be solid blue when a weak signal is received, set BLUE BACKGROUND to ON. The screen will be blue and the sound will be muted. Or, if you want to receive the weak signal, set BLUE BACKGROUND to OFF. When you select a channel that is receiving a weak signal, you will see and hear the static in the TV programming.

To set BLUE BACKGROUND to ON or OFF, follow the steps below.

1

Press the MENU button.

				1
>	PRIM. SETUP		PRESS B	1
	VCR PROGRAM
	VCR PROGRAM
	VCR SETUP
	CAPTION
	REMINDER
	BRIGHTNESS

2

Press the PLAY/o button or the STOP/p button to select VCR SETUP, then press the F.FWD/B button.

VCR SETUP
> ONE TIME PLAY	[ON]
REPEAT PLAY

ON-SCREEN MODE

DEFEAT RECORDING [OFF]

BLUE BACKGROUND [ON]

SELECT KL CHOOSE B

TO END PRESS EXIT

3

Press the PLAY/o button or the STOP/p button to select BLUE BACKGROUND. Then, press the F.FWD/B button repeatedly so that OFF (or ON) appears beside BLUE BACK-

GROUND.

VCR SETUP
ONE TIME PLAY	[ON]

REPEAT PLAY

ON-SCREEN MODE

DEFEAT RECORDING [OFF]

>BLUE BACKGROUND [ON]

SELECT KL CHOOSE B

TO END PRESS EXIT

4

Press the STATUS/EXIT button.

2-3

POWER

SLEEP/WAKE UP

	PLAY
REW		F.FWD
	STOP
MENU	STATUS/EXIT	CLEAR

1	2	3		4
4	5	6	CH.	4
7	8	9
	0	ALT. CH	VOL.
	0	ALT. CH
SPEED	MEMORY	PAUSE/STILL
REC/OTR	TRACKING		MUTE

Image 46

Contents CCB130AT CCB132AT CCB190AT CCB192AT Dear Philips product owner For Customer UseIntroduction FeaturesSafety Precautions Philips Consumer Electronics Company recommends that youTable of Contents TV/VCR Maintenance Putting Batteries in the Remote ControlUsing the Remote Control Recording PreventionHooking Up the TV/VCR Hook up your TV/VCR using one of the connections shownRod Antenna Hooking Up the TV/VCR cont’d Crooked Pin Straight PinYou cannot set up channels if you are using a Cable Box Turning On the TV/VCRLanguage Selection Press the Menu buttonAutomatic Channel Setup Adding/Deleting Channels Press the PLAY/ o button or the STOP/ p button to selectManual Clock Setting Setting the ClockCable Box users must set the clock manually Setting the Clock cont’d Setting the Clock cont’d Automatic PBS Channel SelectionWait for the TV/VCR to find Manual PBS Channel Selection Button Press the PLAY/ button or the STOP/ button toSelect SET PBS CH. MANUAL. Then, press the F.FWD/B Use the Number buttons to select your PBS stationDaylight-Savings Time Time Zone Front Panel Rear Panel AC Power CordANTenna Jack Remote Control Buttons STATUS/EXIT Button STOP/ ButtonREWind/ Button Menu ButtonAdjusting the Picture Controls Adjusting the Picture Controls cont’d Decrease IncreaseIf you select Status ON, then select Counter only on On-Screen Status DisplaysIf you select Status ON, then select Counter only OFF If you select Status OFFPress the PLAY/ button or the STOP/ button to select ReminderPlaying VHS Quasi Play Back SqpbRecording To stop recording, press the STOP/ button Tape SpeedsOne-Touch Recording OTRRerecording Tape Duplication Different brands of equipment may operate differentlyTimer Recording DailyTimer Recording cont’d Timer Recording cont’d Checking or Clearing Timer Recordings Gram Review and press the F.FWD/B buttonDefeat Recording Repeat Play B Repeat Play Insert a tape in the TV/VCR Press the Menu buttonRepeat Play cont’d Press the STATUS/EXIT button to remove the menu. A-BReal-Time Counter Memory Press the STATUS/EXIT button. The real-time counter willSuper High Speed Searching LP/SLP Playback OptionsForward and Reverse Searching SP/LP/SLP Viewing a Still PictureSmartLock SmartLock cont’d Example Specific RatingsTo change the access code, follow these steps Rating Explanations Blue Background GroundSleep Timer Press the SLEEP/WAKE UP buttonWake Up Timer Timer Sleep Wake UP TV on ON-TIMEMenu Closed CaptionExample ScreenClosed Caption cont’d Half-screen textVolume Bar Automatic Operation Features Specifications Glossary Helpful Hints Helpful Hints cont’d Renewed Index Stop/p buttonPage Supplied Accessories