Philips CCB130CN Turning On the TV/VCR, You cannot set up channels if you are using a Cable Box

Page 8

8 Turning On the TV/VCR

Before you turn on the TV/VCR, make sure batteries are in the remote control and the TV/VCR is hooked up correctly.

The instructions on this page work only when you turn on the TV/VCR for the first time.

1

Press the POWER button. The TV/VCR will come on and the screen shown below will appear.

SELECT LANGUAGE

> ENGLISH

ON

FRANCAIS

SELECT KL OR

PRESS MENU TO CONTINUE

2

Press the PLAY/K button or the STOP/L button to select

English or French on-screen displays and menus.

3

Press the MENU button. The screen shown below will appear.

CONNECT ANTENNA OR CABLE

TO TVCR

THEN PRESS B

TO END PRESS EXIT

4

Press the F.FWD/B button to begin automatic channel setup. The TV/VCR will memorize all available channels. When channels are set, CHANNELS ARE SET will appear on the screen briefly. Then the TV/VCR will go to the lowest channel pro- grammed.

(If you try to set up channels when there is no antenna or cable connected to the TV/VCR, programming will appear to take place, but eventually a NO TV SIGNALS ... message will appear on the screen. Connect an antenna or cable to the ANT(enna) jack on the TV/VCR, then press the F.FWD/B button again. You may need to follow the steps on page 10 instead.)

5

Use the CH(annel) m/n button or the Number buttons on the remote control to select a TV/VCR channel. Use the VOL(ume) m/nbutton to adjust the sound.

1

POWER

 

 

SLEEP/WAKE UP

 

2

 

PLAY

 

 

4

REW

STOP

 

F.FWD

3

MENU

STATUS/EXIT

CLEAR

 

1

2

 

3

 

 

 

4

5

 

6

CH.

 

5

 

 

 

7

8

 

9

 

 

 

0

ALT. CH

VOL.

 

 

 

 

SPEED MEMORY

PAUSE/STILL

 

 

REC/OTR

TRACKING

 

MUTE

 

Helpful Hints

•If you do not see any on-screen dis- plays when you turn on the TV/VCR, check your hookups, then try again. If you still do not see any on-screen displays, follow the steps on pages nine-10 to select a language and set up channels.

•To skip step 2, press the MENU button. All on-screen displays will be in English. To skip step 4, press the STATUS/EXIT button. Channels will not be set up, and CHANNELS NOT SET will appear on the screen briefly.

•You cannot set up channels if you are using a Cable Box.

•Line Input mode will always be stored in the TV/VCR’s memory as channel 00. When you select chan- nel 00, A/V IN will appear on the screen briefly. Press the CH(annel) m/n button or the Number but-

tons to select another channel.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents CCB130CN CCB190CN Dear Philips product owner For Customer UseFeatures Safety PrecautionsIntroduction Declaration of ConformityTable of Contents Putting Batteries in the Remote Control Using the Remote ControlTV/VCR Maintenance Recording PreventionRod Antenna Hook up your TV/VCR using one of the connections shownHooking Up the TV/VCR Hooking Up the TV/VCR cont’d Crooked Pin Straight PinYou cannot set up channels if you are using a Cable Box Turning On the TV/VCRLanguage Selection Press the Menu buttonAutomatic Channel Setup Adding/Deleting Channels Press the PLAY/ o button or the STOP/ p button to selectCable Box users must set the clock manually Setting the ClockManual Clock Setting Setting the Clock cont’d Setting the Clock cont’d Automatic PBS Channel SelectionWait for the TV/VCR to find Manual PBS Channel Selection Press the PLAY/ button or the STOP/ button to Select SET PBS CH. MANUAL. Then, press the F.FWD/BButton Use the Number buttons to select your PBS stationDaylight-Savings Time Time Zone Front Panel ANTenna Jack AC Power CordRear Panel Remote Control Buttons STOP/ Button REWind/ ButtonSTATUS/EXIT Button Menu ButtonAdjusting the Picture Controls Adjusting the Picture Controls cont’d Decrease IncreaseOn-Screen Status Displays If you select Status ON, then select Counter only OFFIf you select Status ON, then select Counter only on If you select Status OFFPress the PLAY/ button or the STOP/ button to select ReminderPlaying VHS Quasi Play Back SqpbRecording To stop recording, press the STOP/ button Tape SpeedsOne-Touch Recording OTRRerecording Tape Duplication Different brands of equipment may operate differentlyTimer Recording DailyTimer Recording cont’d Timer Recording cont’d Checking or Clearing Timer Recordings Gram Review and press the F.FWD/B buttonDefeat Recording Repeat Play B Repeat Play Insert a tape in the TV/VCR Press the Menu buttonRepeat Play cont’d Press the STATUS/EXIT button to remove the menu. A-BReal-Time Counter Memory Press the STATUS/EXIT button. The real-time counter willPlayback Options Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Viewing a Still PictureSmartLock SmartLock cont’d Example Specific RatingsTo change the access code, follow these steps Rating Explanations Blue Background GroundSleep Timer Press the SLEEP/WAKE UP buttonWake Up Timer Timer Sleep Wake UP TV on ON-TIMEClosed Caption ExampleMenu ScreenClosed Caption cont’d Half-screen textVolume Bar Automatic Operation Features Specifications Glossary Helpful Hints Helpful Hints cont’d Renewed Index MemoryPage Supplied Accessories
Top Page Image Contents