Philips CCC 090AT, CCC 092AT owner manual Checking or Clearing Timer Recordings

36 Timer Recording (cont’d)

Checking or Clearing Timer Recordings

1

With the TV/VCR on, press the MENU button.

2

Press the PLAY/▲ button or the STOP/▼ button to select	1	5
VCR PROGRAM, then press the F.FWD/B button.
3
Press the PLAY/▲ button or the STOP/▼ button to select
PROGRAM REVIEW, then press the F.FWD/B button.
The timer recording information for the program in the lowest
numbered position will appear on the screen. If no timer record-
ings are programmed, nothing will happen when you select PRO-
GRAM REVIEW and press the F.FWD/B button.
4
Press the F.FWD/B button to display information about
the next timer recording. (If you do not press a button within
10 seconds, information about the next timer recording will
appear automatically.) This will continue until all positions have
been displayed. Then, the menu will disappear. You can exit the
Program Review at any time by pressing the STATUS/EXIT but-
ton.
5
To cancel the timer recording displayed, press the
CLEAR button. Either the display will disappear or information		2-4
about other timer recordings will appear. If you do not press any
other buttons, the display will disappear after all timer recordings

have been displayed.

6

Repeat steps 1-4 to make sure you cleared the correct recording.

Helpful Hint

•With ShowGuard, you don’t have to worry about losing your timer recordings. If the power fails, timer recordings will be restored when the clock is reset. (The clock will reset itself automatically if you are using AUTO CLOCK. Details are on pages 14-17. If you are not using AUTO CLOCK, reset the clock manually. Details are on pages 12-13.) The timer recording will not occur only if it was scheduled to take place dur- ing the power failure.