Philips CCC 092AT, CCC 090AT owner manual Wait for the TV/VCR to find

Setting the Clock (cont’d) 15

5		6	Wait for the TV/VCR to find
			the time.
Press the PLAY/▲ button or the STOP/▼ button to select			7
SET PBS CH. AUTO. Then, press the F.FWD/B button.
SET AUTO CLOCK
TIME	– – : – –
DATE	– – / – – / – – – –
NOW SEARCHING
TO END PRESS EXIT

6

NOW SEARCHING flashes on the TV/VCR screen.

7

When the TV/VCR finds the PBS channel, the time will
			5
appear on the screen. Press the STATUS/EXIT button.
SET AUTO CLOCK
TIME	06	: 30 PM
DATE	07	/ 01 / 2001
	SUNDAY

TO END PRESS EXIT

●If CANNOT FIND CLOCK DATA flashes on the TV/VCR screen, you will be prompted to turn off the TV/VCR. Turn off the TV/VCR. Leave it off for several minutes. When you turn on the TV/VCR again, the clock will be set.

SET AUTO CLOCK

TIME	– – : – –
DATE	– – / – – / – – – –

CANNOT FIND CLOCK DATA

TO END PRESS EXIT

8

When the clock is set, go to page 19 and set the TV/VCR clock for your time zone. The channel that supplies the time might be broadcasting from a different time zone. So, select your Time Zone to ensure the TV/VCR clock is correct.

Helpful Hints

•To display the time on the TV/VCR screen, press the STATUS/EXIT but- ton. Details are on page 25.

•You cannot use the AUTO CLOCK feature if you don’t receive a PBS channel that carries a time signal in your area. Set the clock manually.

•Automatic clock setting is not possi- ble if the car battery cord is con- nected to the DC 13.2V jack. CAR USERS SET CLOCK MANUALLY will flash on the screen briefly, then the SET MANUAL CLOCK screen will appear. Refer to pages 12-13 to set the clock manually.