Manual recording | Philips 14PV360/07, 14PV365/07 manual

6. Manual recording

General information

Use 'Manual Recording' to make a sponta- neous recording (for example, a programme cur- rently being shown).

If you want to start and stop a recording manual- ly, read the section 'Recording without auto- matic switch-off'.

If you want to start a recording manually but have it stopped automatically, read the section 'Recording with automatic switch-off'. (e.g. not to record to the end of the tape)

Read the section 'Automatic recording from a

satellite receiver', if you want a recording to be controlled automatically by a satellite receiver.

Recording without automatic switch-off

1.Insert a cassette.
2.Use P+ P- or	0..9 to select the pro-

gramme number you want to record, for example, 'P01'.

3.To start recording, press	RECORD/OTR I .
4.To stop recording, press	L C .

Recording with automatic switch-off (OTR One-Touch-Recording)


1.Insert a cassette.
2.Use				or			to select the pro-
	P+		P-		0..9
gramme number you want to record.
3.Press						.
		RECORD/OTR I
4.Each time you press								you will
							RECORD/OTR I
add 30 minutes to the recording time.

Preventing accidental erasing of cassettes

All cassettes (except for rental and pre-recorded purchased cassettes) have a security tab on the back of the cassette.

To prevent recording over important record-

ings (erasing), you can remove this security tab. If you later decide to record on a protected

cassette, simply cover the hole with adhesive tape.

Lining up recordings (assemble cut)

When you add a further recording to a cassette, which already has a recording on it, a short blank (flicker) can appear between the old and the new recording or the picture itself can flicker. To help reduce these from occurring, proceed as follows:

1.Find the tape position of the old recording where you want to insert the new recording.

2.Look at the last minute of the old recording (playback).

3.Press STILL 2 at the tape position where the new recording is to go and press

RECORD/OTR I .

4.Now start recording as usual by pressing RECORD/OTR I on the remote control.

5.Stop recording with L C .