6The decoded data appears after confirmation. You can go back to change the data. Select the corresponding input field using B 1 or CLEAR .
Change the data with 
7.When all input data are correct, press STATUS/EXIT . The programming is stored in a
TIMER block.
Switching on 'VPS/PDC' in the 'START' input field
Select 'VPS/PDC' using B 1 
CLEAR . Press '1' to switch off 'VPS/PDC' or press '2' to switch on 'VPS/PDC'.
8.Insert a cassette with an intact security tab
(unprotected).
Problems and solutions for pro- grammed recordings
The
*If you want to cancel the programmed record- ing, press C/A .
Cassette is ejected during recording
*The end of the tape was reached during recording.
Error message:
*If you forgot to insert a cassette,'INSERT CASSETTE FOR TIMER RECORDING' will appear.
* If, after pressing SV/V+ , the error message 'FULL' appears, then all TIMER blocks are already programmed. No new recordings can be programmed unless you clear a TIMER block. To delete a Timer block, select it with
B 1 and | L C in the Timer List screen and |
erase it with | CLEAR . |
Cassette was ejected as soon as inserted.
*If a cassette with the security tab removed was inserted, 'PROTECTED CASSETTE TIMER CANNOT RECORD' will appear. Undo the erase protection (chapter 'Manual Recording', section 'Preventing accidental eras- ing of cassettes') or insert another cassette.
Programming a recording (without VIDEO Plus+ system)
1.Press MENU . The main menu will appear.
2.Select 'TIMER' with K B 
L C . Then press
B 1 .
3.Select ONCE, DAILY, or WEEKLY recording with K B 
L C . Then press B 1 .
SELECT K L CHOOSE B
→ONCE
DAILY WEEKLY TIMER LIST
END=EXIT
If all TIMER blocks are in use, 'FULL' will appear on the TV screen.
4.Select TIMER block with 0..9 .
Selecting once/daily/weekly recordings
Use K B 
L C to select from the following options:
'ONCE': Recording once
'DAILY': Repeated daily recordings from Monday to Friday
'WEEKLY': Repeated weekly recordings (every week on the same day)
5.With 0..9 buttons you can enter 'START' (start time) , 'STOP' (end time) , 'PROG.' (pro- gramme number) ‘VPS/PDC’ and 'DATE'.
Programming a recording from the external sources
You can also programme recording from an external source via the Scart socket AV1 or the front A/V connectors AV2.
6.When all inputs are correct, press STATUS/EXIT . The programming information
is stored in a TIMER block.
7.Insert a cassette with an intact security tab (unprotected).
15 | EN |