Philips SVB106 owner manual Helpful Hints cont’d

Page 47

Helpful Hints (cont’d) 47

Tape cannot be inserted.

•Insert the tape, window side up, with the record tab facing you.

•Make sure a tape isn’t already in the VCR by pressing the STOP/EJECT button on the VCR or the EJECT button on the remote control.

•Gently push on the center of the tape when putting it in the VCR. Never force the tape into the VCR.

•If a timer recording is set, the VCR will not accept a tape that does not have a record tab. You may only insert a tape with the record tab intact.

VCR ejects the tape when the RECORD button is pressed or when the VCR power is turned off to set a timer recording.

• Make sure the tape has a record tab. Details are on page five.

There is no playback picture, or the playback picture is noisy or contains streaks.

•Make sure the TV is on the same channel as the VCR’s CH3/CH4 switch. Details are on page seven.

•Make sure the VCR is in VCR position. (The VCR/TV light will appear. If it does not, press the VCR/TV button once.)

•Make sure channel 3 or 4 is properly adjusted at the TV.

•Adjust the tracking. Details are on page 41.

•TVs placed too close to the VCR can cause interference during tape playback. Move the VCR away from the TV.

TV programs cannot be watched normally.

•Press the VCR/TV button to put the VCR in TV position. (The VCR/TV light will disappear.)

•Check the connections between the VCR, TV, antenna/cable, and Cable Box/DBS (if applicable). Details are on pages six-10.

The reception on all channels is poor.

•You may need to tune your TV again.

Line Input

•If you accidentally enter Line Input mode (LineIn Rear (L1) or LineIn Front (L2) will appear on your TV screen briefly), press the CHANNEL o/p buttons or use the Number buttons to select another chan- nel.

The playback picture is too dim, too bright, or fluctuates in brightness.

•Some programs may be broadcast with copyright protection technology in order to protect the rights of copyright owners. This technology is used on programs that are recorded on video tapes or Digital Video Discs (DVDs), as well as some programs broadcast by antenna/cable/satellite television channels. Programs broadcast with copyright protection technology may not record clearly. Likewise, if you play a tape that is a recording of a copyright protected program, the picture may not be clear. Tapes of copy- right protected programs may have a picture that is dark or dim, or the brightness of the picture may fluctuate. Therefore, you should avoid recording or playing copies of copyright protected programs. This VCR incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights own- ers. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Hi-Fi Stereo Sound

•During playback, Hi-Fi audio may temporarily revert to normal audio when you adjust tracking. This is nor- mal.

•When connecting the VCR to a stereo TV, you will only get stereo sound if you use audio cables to con- nect the AUDIO OUT jacks on the VCR to the AUDIO IN jacks on your TV, and if the TV is in Line (Auxiliary) Input mode.

•When you connect the AUDIO OUT jacks on the VCR to the AUDIO IN jacks on your TV, the stereo light on the TV might not glow. But, as long as the VCR status display indicates you are receiving a stereo signal, you are receiving a stereo signal. This is normal.

•Only tapes recorded in Hi-Fi audio will play back in Hi-Fi audio. Tapes recorded in normal audio will play back in monaural audio.

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Video Cassette Recorder For Customer Use Warranty VerificationDeclaration of Conformity FeaturesSafety Precautions IntroductionTable of Contents VCR maintenance Before Using Your VCRPutting Batteries in the Remote Control Using the Remote ControlDisconnect the antenna or cable from your TV Hookups Without a Cable Box/Direct Broadcast SystemHookups Without a Cable Box/Direct Broadcast System cont’d Plug in the AC power cords of the TV and the VCRRecording/Viewing Any Channel Hookups With a Cable Box/Direct Broadcast SystemConnections TV’s Antenna Jack Cable Box/DBS RF coaxial SignalRecording One Channel/Watching Another Hookups With a Stereo TV Below will appear Turning on Your VCRPress the Menu button until Menu 1 appears Automatic Channel SetupAdding/Deleting Channels Automatic Channel Setup cont’dFollow the steps below to set your VCR’s clock. Make sure Setting the ClockSetting the Clock cont’d Language Selection Press the Counter RESET/EXIT button to exitOn-Screen Status Displays OFF mode Press the Display button once. Count modePress the Display button once Clock mode Press the Display button once OFF modeRecord Button Remote Control ButtonsPower Button Number ButtonsIndex Search Button Counter RESET/EXIT ButtonEject Button Time Search ButtonVCR Display Panel Front Panel Video OUT Jack AC Power CordRear Panel Audio OUT JacksRead and follow the steps below to play a tape PlayingVHS Quasi Play Back Sqpb Recording Stopping an OTR One-Touch RecordingStarting an OTR Channels are set up Clock is set Timer RecordingEnter the recording’s start time Timer Recording cont’dRepeat the procedure in to set the recording’s end time Start Time END Time Channel REC Speed SLP Cancelling a Timer Recording Timer Recording cont’dCorrecting a Timer Recording Auto Satellite Link Using a Satellite Tuner Recording One Channel/Watching Another Rerecording Tape Duplication Repeat Play Viewing a Slow Motion Picture Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Viewing a Still PictureAppear at the bottom of the screen Picture SelectPress the Play button to watch the tape Real-Time Counter MemoryPress the Index Search button Index SearchPress the Time Search button Time SearchTo resume normal tape playback, press the Play button Quick FindPress the QUICK-FIND button Automatic Playback Features Or Receiver MTS Broadcast Stereo SystemUnderstanding On-Screen Displays MonitorPress the Menu button repeatedly until Menu 2 appears MTS Broadcast Stereo System cont’dPlease see additional notes on Press the Counter RESET/EXIT buttonHi-Fi Stereo Sound System Cable Box/DBS Output Channel Channel 3 or GlossaryHelpful Hints Helpful Hints cont’d Renewed Specifications 12, 33 Broadcast Power17-18 Recording Timer Second audioSupplied Accessories

SVB106 specifications

The Philips SVB106 is an innovative soundbar that elevates your home entertainment experience through advanced audio technologies and sleek design. Designed for easy integration into modern living spaces, the SVB106 stands out with its compact form factor while delivering high-quality sound that enhances any movie, music, or gaming experience.

One of the defining features of the Philips SVB106 is its immersive sound performance. Equipped with multiple built-in speakers, the soundbar produces a rich, multi-dimensional audio profile. The Dolby Audio technology incorporated into the device ensures that users experience crystal-clear dialogues as well as powerful bass. This technology gives listeners an authentic cinematic experience right from the comfort of their own home.

The SVB106 supports various audio formats, allowing for versatile playback options. Whether users prefer to connect via Bluetooth, HDMI ARC, or optical ports, the soundbar is designed to accommodate different devices seamlessly. Its Bluetooth capability enables users to stream music directly from their smartphones or tablets, making it a great choice for casual listening as well as extensive movie nights.

Another noteworthy aspect of the Philips SVB106 is its user-friendly interface. Onboard controls provide easy access to volume adjustments, input selection, and audio modes, streamlining the entire experience. The soundbar also comes with a remote control, allowing users to manage playback settings from the comfort of their couches.

For aesthetics, the Philips SVB106 features a modern, minimalist design. Its sleek profile fits effortlessly beneath a TV or can even be mounted on a wall, making it an adaptable addition to any home decor. The premium materials used in its construction not only enhance its visual appeal but also contribute to its durability.

The soundbar is energy-efficient, designed to consume low power without compromising on performance. Philips has ensured that the SVB106 aligns with modern sustainability goals while still delivering uncompromising sound quality.

Ultimately, the Philips SVB106 is a feature-rich soundbar that combines cutting-edge technology with user-centric design. Its compelling sound capabilities, versatile connectivity options, and elegant appearance make it an ideal choice for anyone looking to enhance their audio experience at home. Whether for casual listening or full movies, the SVB106 promises to deliver and impress with every use.
Top Page Image Contents