Philips SVZ122 Timer Recording cont’d, Repeat the procedure in to set the recording’s end time

Page 27

SVZ122(H1680).QX33 4/6/99 9:42 PM Page 27

Timer Recording (cont’d) 27

4

Press the PLAY button or the STOP button repeatedly until the desired month appears. Then, press the F.FWD button.

Next, press the PLAY button or the STOP button repeat- edly until the desired day appears. Then, press the F.FWD button.

The day of the week will appear automatically. You can not pro- gram the VCR to record more than one year in advance.

ONE TIME PROGRAM
PROGRAM NUMBER			1
DATE	0	5	/	0 6		WED

START TIME	– – : – –				– –
END TIME	– – : – –				– –
CHANNEL	– –
REC SPEED	– –

5

Enter the recording’s start time.

Press the PLAY button or the STOP button repeatedly until the desired hour appears. Press the F.FWD button. Press the PLAY button or the STOP button repeatedly until the desired minute appears. Press the F.FWD but- ton.

Finally, press the PLAY button or the STOP button to point to AM or PM. AM or PM will flash beside the time. Press the F.FWD button.

ONE TIME PROGRAM
PROGRAM NUMBER		1
DATE	0 5	/ 0 6 WED
START TIME	0 7	: 3 0	P M
START TIME	0 7	: 3 0	P M
END TIME	– – : – –		– –
CHANNEL	– –
REC SPEED	– –			AM
				AM
			→PM

6

Repeat the procedure in step 5 to set the recording’s end time.

ONE TIME PROGRAM
PROGRAM NUMBER		1
DATE	0 5	/ 0 6 WED
START TIME	0 7	: 3 0	P M
END TIME	0 8	: 3 0	P M
END TIME	0 8	: 3 0	P M
CHANNEL	– –
REC SPEED	– –			AM
				AM
			→PM

POWER

VCR/TV

EJECT

1 2 3

4 5 6

7 8 9 CHANNEL

0 +100

RENTAL AUTO CLOCK/

SPEED SELECTOR REPEAT COUNTER

MENU DISPLAY EXIT COUNTER

	RESET	MEMORY
REWIND	/ PLAY	F.FWD
RECORD	/ STOP	PAUSE/STILL

4-6

Instructions continue on page 28.

Image 27

Contents Video Cassette Recorder For Customer Use Warranty VerificationFeatures Safety PrecautionsIntroduction Table of Contents VCR maintenance Before Using Your VCRPutting Batteries in the Remote Control Using the Remote ControlDisconnect the antenna or cable from your TV Hookups Without a Cable Box / Direct Broadcast SystemANT Audio OUT Plug in the TV and the VCRHookups With a Cable Box / Direct Broadcast System ConnectionsRecording/Viewing Any Channel Recording One Channel/Watching Another Hookups With a Cable Box / Direct Broadcast System cont’dHookups With a Stereo TV 2Turn on the TV Turning on Your VCRAutomatic Channel Setup Adding/Deleting Channels Automatic Channel Setup cont’dFollow the steps below to set your VCR’s clock. Make sure Setting the ClockSetting the Clock cont’d Language Selection Press the Counter RESET/EXIT button to exitOFF mode Press the Display button once Count mode Press the Display button once Clock modeOn-Screen Status Displays Rental Selector Button Remote Control ButtonsPower Button Number ButtonsCLOCK/COUNTER Button Counter RESET/EXIT ButtonEject Button Auto Repeat ButtonVCR Display Panel Front Panel Video OUT Jack AC Power CordRear Panel Audio OUT JackRead and follow the steps below to play a tape Playing1Turn on the TV Insert a tape RecordingOne-Touch Recording Starting an OTRStopping an OTR Program Number → Once Daily Weekly Timer RecordingRepeat the procedure in to set the recording’s end time Timer Recording cont’dPress the Counter RESET/EXIT button Timer recording. Details are on page eightCorrecting a Timer Recording Cancelling a Timer RecordingAuto Return Press the Play button or the Stop button repeatedly toSelect Auto Return To stop recording, press the Stop button Press the VCR/TV button on the VCR remote control toTo return to the channel being recorded, use the TV Put the VCR in VCR position. The VCR/TV light will appearAntenna Rerecording Tape DuplicationRepeat Play Viewing a Still Picture Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Super High Speed Searching LP/SLPRental Play Press the Play button to watch the tape Real-Time Counter MemoryAutomatic Playback Features Helpful Hints Helpful Hints cont’d Cable Box/DBS Output Channel Channel 3 or GlossarySpecifications Video Cassette Recorder Limited WarrantyIndex Supplied Accessories