Philips VRZ241AT owner manual Setting Up the VCR Plus+ Programming System, Channels

Page 34

VRZ241(H1795).QX33 4/9/99 9:17 AM Page 34

34 Setting Up the VCR Plus+ Programming System

1

First, fill in the boxes on this page. It will only take a few minutes, and you must do it if you want the VCR Plus+ programming system to work properly.

Since the channel numbers of the stations you receive may not be the same as the station numbers, and since channel numbers differ from area to area, you must program the VCR with your local channel infor- mation. To fill in the boxes, you will need 1) a cable channel list, if applicable (you can request one from your cable company), and 2) a chart that lists VCR Plus+ channel numbers, which you can find in your TV guide or the TV listings of your local newspaper.

NOTE: If you are using a Cable Box/DBS, the Cable/TV channel must be 03 or 04 (the Cable Box/DBS output channel) for every VCR Plus+ channel.

Station

Channels

VCR PLUS+ CH. CABLE/TV CH.

Station

Channels

VCR PLUS+ CH. CABLE/TV CH.

Call Letters

Call Letters

Image 34

Contents VRZ241AT Dear Philips Magnavox product owner For Customer UseSafety Precautions FeaturesIntroduction Table of Contents Before Using Your VCR Hookups Without a Cable Box / Direct Broadcast System Disconnect the antenna or cable from your TVPlug in the TV and the VCR ANT Audio OUTConnections Hookups With a Cable Box / Direct Broadcast SystemRecording/Viewing Any Channel Hookups With a Cable Box / Direct Broadcast System cont’d Recording One Channel/Watching AnotherHookups With a Stereo TV Turning on Your VCR 2Turn on the TVAutomatic Channel Setup Press the VCR button Press the Menu buttonAutomatic Channel Setup cont’d Adding/Deleting ChannelsReviewing Memorized Channels Press the STATUS/EXIT button once or twice to exitSetting the Clock Enter a 0 before a single digit num- berDaylight-Saving Time Language Selection Setting the Remote to Operate a TV 2Find Remote Control Buttons VCR PLUS+/ENTER ButtonRemote Control Buttons cont’d If you select Status ON, then select Counter only on On-Screen Status DisplaysStatus Display example only If you select Status ON, then select Counter only OFFVCR Display Panel Front Panel Rear Panel Playing Recording VCR light does not appear, press the VCR/TV button onceRecording One Channel/Watching Another One-Touch Recording Timer Recording DailyTimer Recording cont’d Instructions continue onPress the STATUS/EXIT button. Program WAS COM Tape SpeedsChecking or Cancelling Timer Recordings See page 44 for more hintsSetting Up the VCR Plus+ Programming System ChannelsSetting Up the VCR Plus+ Programming System cont’d Do each step within 60 seconds of the previous step Press the VCR PLUS+ /ENTER buttonTimer Recording With the VCR Plus+ Programming System cont’d Rerecording Tape Duplication AntennaRepeat Play Press the F.FWD/B button so that on appears besidePress the VCR button Press the Time Search button Time SearchWithin 10 seconds, use the Number buttons to enter Real-Time Counter Memory Super High Speed Searching LP/SLP Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Viewing a Still PictureAutomatic Operation Features Helpful Hints Helpful Hints cont’d Glossary Cable Box Output Channel 03 orSpecifications Limited Warranty Video Cassette RecorderIndex AutomaticVRZ241H1795.QX33 4/9/99 918 AM VRZ241H1795.QX33 4/9/99 918 AM Supplied Accessories