Philips VRB615AT, VRB665AT owner manual Press the VCR button, then press the Menu button

Automatic Channel Setup 11

Although your VCR may automatically memorize the channels you receive when you turn it on for the first time, this function lets you set up channels again. Make each entry within one minute of the previous entry.

1

Press the VCR button, then press the MENU button.

➔VCR SET UP TUNER SET UP INITIAL SET UP

5 Wait for the VCR to set up channels.

1

CBL / DBS	TV	VCR
VCR/TV	POWER SMARTPICTURE

QUICK PROGRAMMING

SELECT: KL	CONFIRM: OK
END: MENU

2

Press the PLAY K or STOP L button to select TUNER

SET UP, then press the OK/STATUS button.

	1	+	2	+		3
	START	.............	STOP	.............	DATE
	4	-	5	-		6
			DAILY		WEEKLY
	7		8			9
	SPEED		DBS
	ALT		0		CLEAR
-	-	STILL/SLOW				+	-
	........ ........

➔ CABLE/ANTENNA		CABLE
AUTO CH. PROGRAMMING			2,4
ADD/DELETE CH.
SELECT: KL	CHANGE: ’
END: MENU
3			1
Press the FF - button repeatedly so that ANT (if you

have an antenna) or CABLE (if you have a cable connec- tion) appears beside CABLE/ANTENNA.

REW	FF
PLAY	3
STOP

VOL OK/STATUS CH

MENU

TIMER

TURBO AUDIO/ SKIP REC END

TIMER MUTE SEARCH SEARCH

4

Press the STOP p button to select AUTO CH. PRO- GRAMMING, then press the OK/STATUS button. AUTO CH. SET PROCEEDING PLEASE WAIT and a scale that shows the progress of channel setup will appear on the screen. The VCR will memorize all the channels you receive.

5

Wait for a few minutes while the VCR sets up channels. When programming is complete, AUTO CH. SET COMPLETED will appear on the screen. Then, the programming of the lowest channel number placed in the VCR’s memory will appear on the screen. Now when you press the CH(annel) o/p button, you will scan only through channels you receive.

EJECT REC /OTR

Helpful Hint

•The two Line Input modes will always be stored in the VCR’s mem- ory at channel 00. To select A/V IN FRONT or A/V IN REAR, press 0, 0 so that A/V IN appears briefly, then press the CH(annel) K/L button so that A/V IN FRONT or A/V IN REAR appears on the screen briefly. To exit Line Input mode, use the CH(annel) K/L button to select a channel other than 00.

•The VCR may automatically set CABLE or ANT. even if you do not select it.