Philips VRB665AT Hookups with a Cable Box/Direct Broadcast System, Connections, Cable Box/DBS

8 Hookups with a Cable Box/Direct Broadcast System

There are two ways to connect your Cable Box/DBS to the VCR. With this connection:

•You may view any channel.

•You must select channels at the Cable Box/DBS. Channels cannot be changed at the VCR.

•You may not view a channel other than the one you are recording.

•You may not set up channels at the VCR.

•You can only program a timer recording for one channel at a time. Set the TV and the VCR to the Cable Box/DBS output channel (channel 03 or 04); set the CH3/CH4 switch to the same channel. Set your Cable Box/DBS to the channel you want to record. When you enter the channel you want to record in a timer recording, select channel 03 or 04 (the Cable Box/DBS output channel). (This is step 3 on page 37.) Leave the Cable Box/DBS on for a timer recording.

2 VCR

Cable Box/DBS

1	IN
	OUT

IN OUT ANT.IN R

AUDIO

L

RF OUT

VIDEO

CH3 CH4

75Ω
AN		/
C	T
AB
	LE

Cable signal

RF coaxial

cable

RF coaxial cable

Connections

1

Connect a Cable signal to the IN jack on the Cable Box/DBS.

2

Use an RF coaxial cable (supplied) to connect the OUT jack on the Cable Box/DBS to the ANT(enna) IN jack on the VCR.

3

Use a second RF coaxial cable to connect the RF OUT jack on the VCR to the TV’s ANTENNA IN jack.

Recording/Viewing Any Channel

1

With the VCR on and in VCR position (the VCR light will appear on the display panel), use the CH(annel) K/L button to set the VCR to the Cable Box/DBS output channel (channel 03 or 04).

TV’s

3 ANTENNAIN jack

2

Set the TV to the same channel to which you set the VCR. Set the CH3/CH4 switch on the VCR to the same channel.

3

Select the channel you want to view/record at the Cable Box/DBS.

Helpful Hint

•If you are using Record Link, use audio and video cables to connect the AUDIO/VIDEO OUT jacks on the Cable Box/DBS to the AUDIO/VIDEO IN jacks on the back of the VCR. Details are on page 32.