MENU
CLOCK
AUTO INSTALL
MANUAL SEARCH
FOLLOW TV
TV CHANNEL ALLOC.
RECORD SPEED
AUTO STANDBY
VIDEOSYSTEM
SPECIAL SETTINGS
________________________________
…EXITpMENUOK †HOTLINEpCL
TV01
3 Select line 'FOLLOW TV' using P | or P { and confirm with |
OK . |
|
4Press the OK button. 'TV01' will appear in the video recorder display.
5Select programme number '1' on the TV set.
I cannot switch my TV set to programme number '1'
If you have connected additional devices to socket EXT.2 AV 2 , please disconnect these devices. Because of other connected devices, the TV set could switch to the programme number of the scart socket.
6Confirm with OK on the video recorder remote control. The video recorder compares the TV channels on the TV set and the video recorder.
If the video recorder finds the same TV channel as on the TV set, then it stores it at 'P01'.
'NOTV' will appear in the display. The video recorder is not receiving a video signal from the TV set.
Check the plug on the scart cable.
Check your TV's operating instructions to see which scart socket is used for video signals.
If this does not help, it's not possible to use this function.
Please read the section 'Sorting TV channels manually'.
7Wait until the next number, e.g. 'TV02' appears in the display.
8Select the next programme number on the TV set, e.g. '2'.
9Confirm with OK on the video recorder remote control.
Deleting sorting
You can delete an incorrect TV channel sorting by pressing CLEAR (CL) .
0Repeat steps 7 to 9 until you have assigned a programme number to all TV channels.
A To end, press MENU .
16 | Installing your video recording |
|