Philips VR220/07 Programming a recording without Video Plus+, 9on the remote control

TIMER

VPS

DATE REP. PROG. START PDC END

21 MO-FR 01 20:00 ] 21:30

________________________________

REP.pSELECT STOREpOK

Programming a recording (without VIDEO Plus+)

1Switch on the TV set. If required, select the programme number for the video recorder.

2Press TIMER on the remote control twice . A free TIMER block will be highlighted.

3Press TIMER . The information will appear on the screen.

4	With TIMER	,	or	you can select 'DATE'
	(date), 'PROG.' (programme number), 'START' (start time) and 'END'
	(end time).
	Enter or change your information with P {			or P	, or with the
	number buttons	0-9on the remote control.

Selecting onetime/daily/weekly recordings

In 'DATE' use SELECT to select from the following options: 'ONCE': Recording once

'MO-FR': Repeated daily recordings from Monday to Friday

'WEEK.': Repeated weekly recordings (every week on the same day)

Programme numbers of the 'E1' and 'E2' scart socket

You can also programme recordings from external sources via scart socket EXT.1 AV 1 ('E1') or EXT.2 AV 2 ('E2').

'Switching on 'VPS/PDC' in the 'START' input field

Select the 'START' input field using		TIMER . Using SELECT switch on
'VPS/PDC'	(']' lights up). If you	press SELECT again, you will switch
'VPS/PDC'	off (']' goes out).

5When all information is displayed correctly, confirm with OK . The programming information is stored in a TIMER block.

6 Insert a cassette with an intact security tab (unprotected).

ENGLISH

Programming a recording (TIMER) 37