Philips VR270B/07, VR270W/07 Important notes for operation, 9or by putting in a cassette

Important notes for operation

			ENGLISH
Switching on	You can switch on the video recorder with the STANDBY/ON	button, the number buttons
	0-9or by putting in a cassette.
Automatic switch-off	If the video recorder is not used for several minutes, it switches itself off automatically. This
	function can be deactivated (e.g. if you want to use the video recorder as a TV receiver). For more
	information, please read the section 'Automatic switch-off' in chapter 'Additional functions'.
Time in the display	If you have switched the video recorder off with STANDBY/ON	, the time will show in the
	display, e.g. '18:00'.
	If the clock has not been set, '--:--' will appear.
Energy consumption	The video recorder should always be connected to the mains so as not to affect the use of the TV
	or programmed recordings.
	Power consumption is less than 4W.
Power outage/no	Channel information remains saved for up to 1 year, the time and timer information is saved for up
power	to 3 hours.
	The video recorder and the remote control have the option of an 'Emergency exit'. You can use
Emergency exit	the STANDBY/ON button to interrupt any function or step during use.
	You can operate your device without worry. There is no risk whatsoever of damaging the video
	recorder by performing user steps incorrectly.

Important notes for operation 17