Using the satellite receiver
TV channels from a satellite receiver (connected to the scart socket EXT.1 AV 1 ) are received on the video recorder on programme number 'E1'.
To do this, select the programme number 'E1' with 0 on the remote control.
You should select the TV channels to be received by the satellite receiver directly on the receiver itself.
Automatic TV channel search
During installation, all available TV channels are searched for and saved. If the channel assignments of your cable or satellite TV provider change or if you are reinstalling the video recorder, e.g. after moving house, you can start this procedure again. This will replace the TV channels already saved with the new ones.
1Switch on the TV set. If required, select the programme number for the video recorder.
2Press the MENU button on the remote control. 'CLK' will appear on the display.
3 | In | the display, | select 'AUTO' (Automatic TV channel search) with |
| P | or P | . |
4Press OK .
5The automatic TV channel search starts. This allows the video recorder to save all available TV channels. This procedure may take several minutes.
6When the TV channel search is complete, 'OK' will appear on the screen.
7To end, press MENU .
You can read about how to search for a TV channel manually in the section 'Manual TV channel search'.
14 | Installing your video recording |
|