Philips VR299/75 Code Set Up, Timer Recording Using G-Code, 2Set Guide Channels, 2Enter G-Code

TO SET PUSH 3/OK

TO CORRECT PUSH CLEAR TO END PUSH EXIT

G-CODE / SHOWVIEW PROG.

G-Code Set Up

This section is for VR499/75 only.

You can simplify the programming method of timer recording by using G-

2Set Guide Channels

1 Press PLAY 5or	GUIDE CH	USER CH
	GUIDE CHANNEL SET UP
STOP ° to select	255	--
	01	--
“GUIDE CHANN-	02	--
	03	--
EL SET UP” then	04	--
	SELECT	OR ENTER GUIDE
	CH. NO. THEN PUSH /OK.

Timer Recording Using G-Code

This section is for VR499/75 only.

By entering the G-Code number for a particular TV programme, you can

Code. Whenever you want to record a

press 3/OK.

TO END PUSH EXIT

easily programme a timer recording.

TV program, all you need to do is to find out the programme’s G-Code number.

You can easily find out this number by checking the TV programme list of your local newspaper or TV guide magazine.

Simply entering the programme’s G-Code using the remote control will make the VCR record the programme.

Before using G-Code for the first time, you need to set the guide channel number for each local channel number. The local channel (user channel*) number is the number you select on the VCR to record a programme, while the guide channel number is the one assigned to that local channel and you can also find it in the TV programme list of your local newspaper or TV guide magazine.

Make sure...

• You can use the tables below to note your user channel numbers and their guide channel numbers.

1Select VCR Set Up Mode

1	Press MENU.	SELECT CHOOSE /OK
2	Press PLAY 5or	GUIDE CHANNEL SET UP
		SET CLOCK

STOP ° to select

“INITIAL SET UP”

then press 3/OK. TO END PUSH EXIT

2While the GUIDE CH number is flashing, press PLAY 5 or STOP ° button repeatedly or press number buttons to select guide channel number (GUIDE CH), then press

3/OK.

•For example, for guide channel number 9, press 0, 9.

Always enter “0” before any single number entries.

3While the space for the USER CH is flashing, press PLAY 5 or STOP ° button repeatedly or press number buttons to enter local channel number (USER CH), then press

3/OK.

•For example, for local channel number 9, press 0, then 9.

Always enter “0” for single digits.

4Repeat the above procedures until you set the guide channel for all the receivable local channels.

3Finish Setting

Press EXIT/STATUS.

To correct a user channel number and/or a guide channel number,

repeat the same procedures explained above. This time, enter the correct user channel number and/or the correct guide channel number.

1Select G-Code Mode

Press TIMER.	G-CODE / SHOWVIEW PROG.
Press PLAY 5or	CODE
STOP °to select
“G-CODE/SHOW-
VIEW” then press	TO END PUSH EXIT

3/OK.

The G-Code entry menu appears on the TV screen.

2Enter G-Code

Press Number

buttons to enter the

CODE 135

G-Code number assigned to the TV programme you want

to record, then press 3/OK.

•If “ERROR-RE-ENTER CODE” appears on the TV, you have entered an incorrect G-Code number. If this happens, press CLEAR to erase the number, then enter the correct number.

•If you have not yet set the user channel, the “GUIDE CHANNEL SET UP” screen will appear. Press

PLAY 5or STOP °button repeatedly or number buttons to enter the USER CH number which the broadcast for the G-Code number is received on the VCR, then press 3/OK.

Local TV Station’s	User Channel	G-Code Guide
Name	No.	Channel No.
Example: Nine	09	09

Local TV Station’s

Name

User Channel	G-Code Guide
No.	Channel No.

— 15 —

VR299/499-75 EN 15 7/6/99, 3:46 PM